RS PRO 200VA Isolating Transformer, 230 V ac, 245 V ac, 400 V ac, 415 V ac Primary 1 x, ±12V ac Secondary

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

RS PRO DIN Rail Isolation Transformer, Primary voltage 230, 245, 400, 415 V ac, Secondary voltage ± 12 V ac

It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications we developed to support various applications, such as electromagnetic, relays, pumps or heating elements.

.

The functionality of the Isolation Transformer has a concept to provide galvanic isolation between the AC power lines (mains) and the connected device, meaning no a DC can cross between the windings.

Today, we are proudly introducing our own branded RS PRO Isolation Transformer with a screw connector for multiple input and brackets for screw fixation. The exceptional isolating property and safety of our Transformer provide step up or step down of line (mains) voltages while reducing the noise coming from the primary to secondary or opposite.

The Isolation Transformers supports different types of equipment, from testing power-related devices to medical isolation equipment. However, they must meet rigorous electrical requirements to make sure no leakage current is in place.

Features and Benefits

  • 100% electrical and flash tested following BS EN 61558-1 regulations

  • Our Transformer provides high-quality safety and isolating properties for use in control circuits and general applications

  • Exceptional low loss noise laminations characterising our Isolation Transformer

  • Thanks to the dual standard primary winding 230/400 V ac with +15 V tap creates input flexibility to your equipment

  • The Transformer has an earth terminal provided whereas the dual secondaries are centre tapped

  • The Isolation Transformer has reliable protection against humidity and rusting thanks to varnish impregnation

  • The Transformer is fully shrouded cage clamp terminal with the voltage markings

  • All the crucial technical information is available on the permanent label attached

  • The Isolation Transformer provides high efficiency with a low regulation design

Applications

The Transformer with isolating properties has an association with the following applications:

  • Medical industry

  • Testing power devices

  • where transfer power between two circuits is mandatory

Why RS PRO?

RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.

Laminated

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230 V ac, 245 V ac, 400 V ac, 415 V ac
Secondary Voltage Rating ±12V ac
Power Rating 200VA
Mounting Type DIN Rail
Number of Outputs 1
Length 108mm
Width 114mm
Depth 110mm
Dimensions 108 x 114 x 110mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +35°C
Weight 5kg
32 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
72,77
(excl. BTW)
88,05
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 72,77
25 +
€ 66,70
Related Products
This series of input transformers from our trusted ...
Description:
This series of input transformers from our trusted RS Pro brand are high quality and suitable for use in general applications. They are single phase transformers with screw connectors for universal input voltages, brackets for screw fixing or to DIN ...
Brought to you by RS Pro, a range ...
Description:
Brought to you by RS Pro, a range of isolation transformers, performing in a single phase solution. Featuring screw connectors for multiple inputs and including robust brackets for screw and/or DIN Rail fixing. High quality isolation transformers are excellent within ...
Single-phase control and signalling transformers (50 → 60 ...
Description:
Single-phase control and signalling transformers (50 → 60 Hz - class 1).Active parts protected by cover up to 1000 VA.Mounting on full or perforated platinum, or rail according to power.Direct mounting possible on symmetrical DIN rail up to 250 VA.More ...
Low inrush current control, safety isolating and isolating ...
Description:
Low inrush current control, safety isolating and isolating transformerScrew type terminals, fitted with screw mounting bracketsCompact design with ±20V tappings on the primary windingFor use up to +40°C ambient maximum.