Legrand 630VA DIN Rail Panel Mount Transformer, 230 V ac, 400 Primary 1 x, 115 V ac, 230 V ac Secondary

  • RS-stocknr. 422-9700
  • Fabrikantnummer 0 427 92
  • Fabrikant Legrand
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Control Panel Primary 230/400Vac (310 to 1000VA)

Compact, open type control panel transformer
Fully shrouded screw terminals with permanent marking
Detailed product specification permanently marked on front of unit
VA ratings compatible with available protection devices
Dual standard primary winding 230 / 400Vac

Note

Mounting clips are not supplied with these products. Transformers up to 160 VA can be clipped to DIN rail using accessory 0044 16, RS stock number 423-2201 or 620-3592 for higher values or directly fixed using screws through the easily accessible fixing points.

Standards

IEC/EN 61 558

Approvals

8888

Laminated

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230 V ac, 400
Secondary Voltage Rating 115 V ac, 230 V ac
Power Rating 630VA
Mounting Type DIN Rail
Number of Outputs 1
Length 126mm
Width 123mm
Depth 126mm
Dimensions 126 x 123 x 126mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +35°C
Weight 7.8kg
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
248,52
(excl. BTW)
300,71
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 248,52
5 - 9
€ 238,32
10 - 24
€ 228,90
25 +
€ 220,21
Related Products
This series of input transformers from our trusted ...
Description:
This series of input transformers from our trusted RS Pro brand are high quality and suitable for use in general applications. They are single phase transformers with screw connectors for universal input voltages, brackets for screw fixing or to DIN ...
This series of control transformers stands out thanks ...
Description:
This series of control transformers stands out thanks to the following special features:. Low voltage dropHigh performance during short-term operationInternational standard voltage 230 V/400 V in accordance with DIN IEC 38Primary-side ±5% taps to adjust the voltageCan be used worldwide ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.
Safety isolating transformer single phaseDIN rail mount (up ...
Description:
Safety isolating transformer single phaseDIN rail mount (up to 250VA) or Surface mount with screws (400VA & above) Terminals with finger protection IP2x or xxB up to 400VANew design provides interference filter between windingsClear laser engraved markingsSuitable for maximum 50°C ...