Legrand 100VA DIN Rail Panel Mount Transformer, 215 V ac, 230 V ac, 245 V ac Primary 1 x, 24V ac Secondary

  • RS-stocknr. 618-8178
  • Fabrikantnummer 0 442 13
  • Fabrikant Legrand
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Control and signalling transformers, 442 series

Single-phase control and signalling transformers (50 → 60 Hz - class 1).
Active parts protected by cover up to 1000 VA.
Mounting on full or perforated platinum, or rail according to power.
Direct mounting possible on symmetrical DIN rail up to 250 VA.
More compact than previous models (423 series).
Interference filtering (except stock no. 620-3110).
Voltage adjustment: ±15 V.
Features a marking area.
Supplied with connection strip 0 V secondary earth terminal.

Standards

  EN 61131-2, EN 60204-1 and EN60439-1, IEC EN 61558-2-2 and 2-4 or 2-6, UL506

Approvals

  CSA C22-2-N°66.

Specificaties
Kenmerk Waarde
Primary Voltage Rating 215 V ac, 230 V ac, 245 V ac
Secondary Voltage Rating 24V ac
Power Rating 100VA
Mounting Type DIN Rail
Number of Outputs 1
Length 94mm
Width 94mm
Depth 113mm
Dimensions 94 x 94 x 113mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +50°C
Weight 2kg
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
82,01
(excl. BTW)
99,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 82,01
10 - 24
€ 77,00
25 - 49
€ 73,15
50 - 99
€ 70,66
100 +
€ 67,13
Related Products
A range of compact moulded case current transformers ...
Description:
A range of compact moulded case current transformers suitable for primary currents from 25A to 500A with built-in sealable terminal covers. For transforming various primary currents into 5A standard secondary current using 20mm or 30mm busbars or 24mm cables. DIN ...
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. This range of single-phase single-winding safety and isolation transformer is primarily designed for use in repetitive applications.ABT 7 series transformers provide enhanced electrical isolation ...
This series of control transformers stands out thanks ...
Description:
This series of control transformers stands out thanks to the following special features:. Low voltage dropHigh performance during short-term operationInternational standard voltage 230 V/400 V in accordance with DIN IEC 38Primary-side ±5% taps to adjust the voltageCan be used worldwide ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.