SolaHD 50VA DIN Rail & Panel Mount Transformer, 220 → 480V ac Primary, 110 → 120V ac Secondary

  • RS-stocknr. 890-8858
  • Fabrikantnummer E050
  • Fabrikant SolaHD
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

SolaHD SBE Encapsulated Series Transformers

The SBE Encapsulated series control transformers have been epoxy encapsulated thus sealing the transformer windings from moisture, dirt and industrial contaminants. They feature extra deep, moulded terminal barriers which helps to reduce the possibility of electrical failure from arcing or frayed lead wires. Thanks to their rugged design and high reliability they are ideally suited for all industrial applications and environments.

50 to 1000 VA, 50/60 Hz suitable for worldwide applications
Interleaved copper windings reduce I²R losses and maximize efficiency
+55 °C Rise, +105 °C insulation system to minimize heat
Epoxy encapsulated to protect cores and coils against moisture, dirt, and other contaminants
Meets or Exceeds NEMA Standard ST 1 and ANSI C89.1 for load inrush capability
Integrally moulded, flame retardant (IEC 707 / ISO Class 1210) Terminal Blocks provide greater terminal contact area and improved conductivity
Heavy gauge steel mounting plate
Mounting dimensions are compatible with similar control transformers

Specificaties
Kenmerk Waarde
Primary Voltage Rating 220 → 480V ac
Secondary Voltage Rating 110 → 120V ac
Power Rating 50VA
Mounting Type Panel
Dimensions 76.5 x 101.3 x 69.1mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
68,34
(excl. BTW)
82,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 68,34
Related Products
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. This range of single-phase single-winding safety and isolation transformer is primarily designed for use in repetitive applications.ABT 7 series transformers provide enhanced electrical isolation ...
Compact, open type control panel transformerFully shrouded screw ...
Description:
Compact, open type control panel transformerFully shrouded screw terminals with permanent markingDetailed product specification permanently marked on front of unitVA ratings compatible with available protection devicesDual standard primary winding 230 / 400Vac.
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. Single-phase single-winding safety and isolation transformers.Able to supply higher powers on occasion.Feature a panel display to reduce ESD. Screw termination.Plate mounting.
Transformers for continuous loadFor supplying control circuits, switch ...
Description:
Transformers for continuous loadFor supplying control circuits, switch relays or installation contactsSecure equipment cabinet thanks to PTC-resistor for protecting against overload and short circuits.