Block 160 (CosΦ=1) VA, 320 (CosΦ=0.5) VA Isolating Transformer, 230V ac, 400V ac Primary, 24V ac Secondary

  • RS-stocknr. 903-9909
  • Fabrikantnummer FST 160/24
  • Fabrikant Block
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

BLOCK FAIL-SAFE Transformer

High-quality multi-purpose FAIL-SAFE transformers. The transformers are designed for the electrical isolation of the input and output sides. The FAIL-SAFE transformers are suitable for the construction of both SELV and PELV electrical circuits.

6.3 x 0.8 mm Tab Connector
4mm² Screw Terminals

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230V ac, 400V ac
Secondary Voltage Rating 24V ac
Power Rating 160 (Cosφ=1) VA, 320 (Cosφ=0.5) VA
Mounting Type DIN Rail
Dimensions 96 x 102 x 102mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +40°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
57,38
(excl. BTW)
69,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 57,38
Related Products
From Block, these short circuit proof encapsulated autowound ...
Description:
From Block, these short circuit proof encapsulated autowound transformers allow step up or step down of mains voltage at 50/60 Hz. Featuring easy to install mounting holes, screw terminal connections with strain relief for connecting leads, a robust and reliable ...
BLOCK STEU series isolating transformers with a dual ...
Description:
BLOCK STEU series isolating transformers with a dual input of 230 and 400 Vac, These safety transformers have a high performance for the volume due to their compact design. The transformers are quick to cable up due to the use ...
Short-circuit proof safety isolating transformersResin encapsulated transformersStable plastic ...
Description:
Short-circuit proof safety isolating transformersResin encapsulated transformersStable plastic enclosureIntegrated fuse protection and thermal cut-out against overloading and short circuitsScrew-type terminals for the connecting leads on input and output sideMeet the requirements of IEC61 558, EN61 558, ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.