Mean Well, DRP DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 20A Output Current

  • RS-stocknr. 282-574
  • Fabrikantnummer DRP-480S-24
  • Fabrikant Mean Well
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Mean Well DRP Series Single Output Power Supply

A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W.

Features and Benefits

• Universal AC input/Full range • Protections: Short circuit/Overload/Over voltage/Over temperature
• Cooling by free air convection
• Can be installed on DIN Rail TS-35/7.5 or 15
• UL 508 (industrial control equipment) approved
• LED indicator for power-on
• 100% full load burn-in test
• Fix switching frequency at 100 kHz
• 3 years warranty
• Built-in active PFC function

Product Application Information

The units are suitable for powering security and building automation controls which are increasingly required in commercial and residential premises.

Why use a DIN Rail Power Supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC/DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids and relays.

Points to Consider When Buying a DIN Rail Power Supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection Types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Standards

UL508, TUV EN60950-1 approved

Mean Well DRP series 480 W, 24 V dc, 20 A DIN Rail power supply.

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 90 → 132V ac
Output Voltage 24 V dc
Output Current 20 A
Power Rating 480W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 125.5mm
Maximum Temperature +70°C
Output Voltage Adjustment Range 24 → 28V
Series DRP
Ripple And Noise 120mV Pk-Pk
Depth 100mm
MTBF 187900h
Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
Minimum Temperature -20°C
Mounting Type DIN Rail Mount
Load Regulation ±1%
Special Features Overvoltage and Short Circuit Protection
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
61 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
156,84
(excl. BTW)
189,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 156,84
Related Products
Primary clocked switching power supply unitsWide input rangeHigh ...
Description:
Primary clocked switching power supply unitsWide input rangeHigh efficiencyAdjustable output voltages (devices > 10 W)Low power loss and low heat developmentFree convection cooling (no forced cooling by fan)Idle, overload and continuous short circuit proofIntegrated input protectionU/I characteristic curve ...
The TBLC series DIN Rail mounting power supplies ...
Description:
The TBLC series DIN Rail mounting power supplies are designed for industrial and residential applications. They are lower cost than the existing TBL range, with similar electrical specifications. Also, they fully comply to the new standby power and efficiency requirements ...
Delta; 3 x 220/254/289Vac ±11.5VacStar; 3 x 380/440/500Vac ...
Description:
Delta; 3 x 220/254/289Vac ±11.5VacStar; 3 x 380/440/500Vac ±20Vac24Vdc unregulated outputSafety isolating transformer to VDE0551, EN607424.5kV input/output isolationShielding windingVaristor protection and discharge resistorScrew terminals on input/outputHoused in robust metal enclosureMultiple mounting options ...
The Convert Select series are DIN Rail mountable ...
Description:
The Convert Select series are DIN Rail mountable DC-DC and AC-DC converters. They have power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low electromagnetic emissions. Internal protection circuits such as ...