ABB, CP-D DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 2.5A Output Current

  • RS-stocknr. 486-726
  • Fabrikantnummer 1SVR427044R0200 - CP-D 24/2.5
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Switching power supply units CP-D range

Primary clocked switching power supply units
Wide input range
High efficiency
Adjustable output voltages (devices > 10 W)
Low power loss and low heat development
Free convection cooling (no forced cooling by fan)
Idle, overload and continuous short circuit proof
Integrated input protection
U/I characteristic curve (fold-forward behaviour on overload - does not switch off)
Status indicator LEDs
Suitable for installation in distribution cabinets
Redundancy unit CP-D RU (772-4826) for decoupling of CP range power supply units with two inputs, each up to 5 A per channel and 1 output up to 10 A, ensures automatic redundant power supply operation for critical applications or enables increased power by two parallel connected power supplies

Approvals

UL, CAN, CSA

Standards

UL, CAN, CSA

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 90 → 264V ac
Output Voltage 24 V dc
Output Current 2.5 A
Power Rating 60W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 91mm
Width 71mm
Load Regulation ±1%
Minimum Temperature -25°C
Maximum Temperature +70°C
Output Voltage Adjustment Range 24.0 to 24.0V
Depth 57.5mm
Efficiency 86.0%
Ripple And Noise 50mV Pk-Pk
Mounting Type DIN Rail Mount
Series CP-D
28 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was € 103,63
81,50
(excl. BTW)
98,62
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 81,50
10 - 14
€ 78,21
15 +
€ 74,81
Related Products
Spring up terminal accepts wiring of ring terminals.Slim ...
Description:
Spring up terminal accepts wiring of ring terminals.Slim Size.Width: 22.5mm (10W/15W/30W), 36mm (60W/90W),46mm (120W),60mm (240W)Can be installed in six mounting directions.Optical mounting bracket is available for panel mounting.Five-Year Warranty.
Power supplies that deliver a non-filtered 24 V ...
Description:
Power supplies that deliver a non-filtered 24 V output.These supplies comprise a safety transformer with electro-static display and dual terminal block for single-phase applications.The secondary output is protected by a fuse.A green indicator light shows the operating voltage.Supplied with coupling ...
The power supplies in the TBD2 range are ...
Description:
The power supplies in the TBD2 range are designed for home automation applications, security systems and control cabinets.They are also used for applications that require insulation class II.DIN rail or chassis mounting.Screw terminal connection.
The Q-Series DIN rail power supplies from PULS ...
Description:
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help ...