ABB, CP-D DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 800mA Output Current

  • RS-stocknr. 486-748
  • Fabrikantnummer 1SVR427041R1000 - CP-D 12/0.83,1SVR4
  • Fabrikant ABB
Wetgeving en compliance
Land van herkomst: CN

Switching power supply units CP-D range

Primary clocked switching power supply units
Wide input range
High efficiency
Adjustable output voltages (devices > 10 W)
Low power loss and low heat development
Free convection cooling (no forced cooling by fan)
Idle, overload and continuous short circuit proof
Integrated input protection
U/I characteristic curve (fold-forward behaviour on overload - does not switch off)
Status indicator LEDs
Suitable for installation in distribution cabinets
Redundancy unit CP-D RU (772-4826) for decoupling of CP range power supply units with two inputs, each up to 5 A per channel and 1 output up to 10 A, ensures automatic redundant power supply operation for critical applications or enables increased power by two parallel connected power supplies





Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 90 → 264V ac
Output Voltage 12 V dc
Output Current 800 mA
Power Rating 10W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 91mm
Width 18mm
Output Voltage Adjustment Range 12.0 to 12.0V
Mounting Type DIN Rail Mount
Efficiency 78.0%
Depth 57.5mm
Ripple And Noise 50mV
Load Regulation ±1%
Series CP-D
Minimum Temperature -25°C
Maximum Temperature +70°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-12-2019, met een levertijd van 1 werkdag.
Prijs Each
Was € 76,00
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 43,40
10 - 14
€ 41,64
15 +
€ 39,84
Related Products
The power supplies in the TBD2 range are ...
The power supplies in the TBD2 range are designed for home automation applications, security systems and control cabinets.They are also used for applications that require insulation class II.DIN rail or chassis mounting.Screw terminal connection.
The PSU-12V1AIN unit is a sealed (resin-potted) mains ...
The PSU-12V1AIN unit is a sealed (resin-potted) mains power supply suitable for use with RF Solutions' outdoor-rated wireless equipment. Mains Input: 90 to 264VacOutput: +12Vdc @ 1AEnvironment Rating: IP67Output connector: 5.5 x 2.1mm barrel jack plugOperating temperature range: 0 to ...
The design and functionality of the SIMATIC PS ...
The design and functionality of the SIMATIC PS 307 single-phase power supply with automatic range switchover of the input voltage is an optimal match to the SIMATIC S7-300 PLC. The supply to the CPU is quickly established by means of ...
ABL1 regulated switch mode power supplies are designed ...
ABL1 regulated switch mode power supplies are designed to provide the dc voltage necessary for simple, dedicated control circuits. Divided into two families, these power supplies are able to meet all the needs encountered in standard commercial machines.ABL1 regulated switch ...