Siemens DIN Rail Power Supply, 12V dc Output Voltage, 900mA Output Current

  • RS-stocknr. 136-5299
  • Fabrikantnummer 6EP3320-6SB00-0AY0
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: AT
Productomschrijving

Siemens LOGO!Power DIN Rail Mount Power Supplies

The miniature LOGO!Power power supply units in the same design as the LOGO!8 modules offer great performance in the smallest of spaces. The high degree of efficiency across the entire load range and the low power loss in no-load operation ensure efficient operation. The wide-range input for single-phase supply systems and for DC power networks as well as the power reserve when switching on capacitive loads satisfy the requirements of numerous applications. The large temperature range and extensive certifications make them suitable for universal use. The reliable power supplies with their flat, stepped-profile enclosure can be integrated extremely flexibly, for example in distribution boards. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.

Features and Benefits

• Comprehensive range: 5 V, 12 V, 15 V and 24 V up to 100 W • Compact size
• Efficiency up to 90% over the entire power range
• Operating temperature range -24°C to 70°C
• Simple output current measuring without disconnecting the cable
• Can be mounted using DIN Rail or onto a wall
• High inrush current due to their power reserves

Product Application Information

The reliable power supplies with their flat, stepped housings can be flexibly integrated in numerous applications, for example in distribution boards.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

  • DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

  • Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

  • Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

  • Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross-sectional area to help minimise noise and heat.

  • Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.

  • Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

  • Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Siemens 6EP3320-6SB00-0AY0 Power Supply, 12 V, 900mA, 10 W

Specificaties
Kenmerk Waarde
AC or DC Output Voltage Dc
Input Voltage 230V ac
Output Voltage 12 V dc
Output Current 900 mA
Power Rating 10.8W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 90mm
Width 18mm
Ripple And Noise 200 (Ripple)mV Pk-Pk
Load Regulation 0.1%
Special Features Flexible Deployment, Flexible Mounting, Global Use, High Energy Efficiency, Load Monitoring, Low Width, Reliable, Wide Portfolio
Minimum Temperature -25°C
MTBF 3793080h
Depth 53mm
Standards Met CB, CE Marked, CSA C22.2 No. 107.1, CSA C22.2 No. 60950, CULus, CURus Recognised, File E151273, File E197259, FM Approval, NEC Class 2, UL 508, UL 60950
Maximum Temperature +70°C
Mounting Type Snap On
Output Voltage Adjustment Range ±3%
Hazardous Area Certification ATEX
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
35,10
(excl. BTW)
42,47
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,10
Related Products
Primary clocked switching power supply unitsWide input rangeHigh ...
Description:
Primary clocked switching power supply unitsWide input rangeHigh efficiencyAdjustable output voltages (devices > 10 W)Low power loss and low heat developmentFree convection cooling (no forced cooling by fan)Idle, overload and continuous short circuit proofIntegrated input protectionU/I characteristic curve ...
The low profile DRL series DIN Rail power ...
Description:
The low profile DRL series DIN Rail power supply provides a reliable solution for many industrial applications and building automation. With double insulation and safety Class II input, connection to earth is not required. The NEC Class 2 compliant output, ...
The HDR series PSU is an economical and ...
Description:
The HDR series PSU is an economical and ultra slim power supply which can be adapted to be installed on TS-35/7.5 or TS-35/15 DIN Rails. The body has a narrow width which allows for space saving within a cabinet. The ...
The power supplies in the TBD2 range are ...
Description:
The power supplies in the TBD2 range are designed for home automation applications, security systems and control cabinets.They are also used for applications that require insulation class II.DIN rail or chassis mounting.Screw terminal connection.