Siemens DIN Rail Power Supply, 5V dc Output Voltage, 6.3A Output Current

  • RS-stocknr. 136-5303
  • Fabrikantnummer 6EP3311-6SB00-0AY0
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: AT
Productomschrijving

Logo!Power 4th Generation PSU

The mini power supply devices designed into the LOGO!8 module offer great performance in the smallest space: The excellent efficiency over the complete load range and the low performance loss during idle times guarantee efficient operation. The power supply has wide-range input for single phase mains and connection to DC power lines and a large operating temperature range. Comprehensive certifications and a performance reserve when switching capacitive loads, make universal application possible.
To increase the availability, the LOGO!Power supply units can be combined with DC UPS, redundancy and selectivity modules.

Features and Benefits

• Comprehensive range: 5 V, 12 V, 15 V and 24 V up to 100 W • Compact size
• Efficiency up to 90% over the entire power range
• Operating temperature range -24°C to 70°C
• Simple output current measuring without disconnecting the cable
• Can be mounted using DIN Rail or onto a wall
• High inrush current due to their power reserves

Product Application Information

The reliable power supplies with their flat, stepped housings can be flexibly integrated in numerous applications, for example in distribution boards.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

//media.rs-online.com/t_line/L1365303-02.jpg

Siemens 6EP3311-6SB00-0AY0 Power Supply, 5 V, 6.3 A, 32 W

Specificaties
Kenmerk Waarde
AC or DC Output Voltage Dc
Input Voltage 230V ac
Output Voltage 5 V dc
Output Current 6.3 A
Power Rating 31.5W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 90mm
Width 54mm
MTBF 2654280h
Maximum Temperature +70°C
Depth 53mm
Hazardous Area Certification ATEX
Ripple And Noise 100 (Ripple)mV Pk-Pk
Minimum Temperature -25°C
Special Features Flexible Deployment, Flexible Mounting, Global Use, High Energy Efficiency, Load Monitoring, Low Width, Reliable, Wide Portfolio
Load Regulation 0.1%
Output Voltage Adjustment Range 4.6 → 5.4V
Mounting Type Snap On
Standards Met CB, CE Marked, CSA C22.2 No. 107.1, CSA C22.2 No. 60950, CULus, CURus Recognised, File E151273, File E197259, FM Approval, NEC Class 2, UL 508, UL 60950
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
92,00
(excl. BTW)
111,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 92,00
Related Products
The S82S Switch mode miniature DIN Rail mounted ...
Description:
The S82S Switch mode miniature DIN Rail mounted DC to DC power supply. The S82S has a power rating of 7.5 W and an output voltage of 5 V plus an input voltage of 12 to 24 Vdc. The miniature ...
From RS Pro a range of high-performance power ...
Description:
From RS Pro a range of high-performance power supplies in a compact 35mm DIN rail mounting package for convenience and space saving. These DIN rail mount power supplies are available with a range of power ratings from 15 W to ...
With the new PIANO series, PULS-quality DIN Rail ...
Description:
With the new PIANO series, PULS-quality DIN Rail power supplies are now available for even the most cost-oriented user. Through an innovative approach, the intrinsic properties of a PULS power supply have now been introduced into a product that also ...
The HDR series PSU is an economical and ...
Description:
The HDR series PSU is an economical and ultra slim power supply which can be adapted to be installed on TS-35/7.5 or TS-35/15 DIN Rails. The body has a narrow width which allows for space saving within a cabinet. The ...