Omron, S8VM DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 2.2A Output Current

  • RS-stocknr. 610-8706
  • Fabrikantnummer S8VM05024CD
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

S8VM series cut-out power supplies 15 → 150W

DIN rail power supply, available in a compact housing from 15 → 150 W at 5, 12 and 24 Vdc.
Activates an alarm if an anomaly is detected by observing dc output behaviour, thus enabling rapid determination of the fault.
Indicates anomalies on the load side (under-voltage alarm).
Indicates an input power supply fault (under-voltage alarm).

Part Number S8VM- 05024CD

The S8VM Switch mode, Din Rail mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM- 05024CD has a power rating of 50 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This Standard model incudes green output indicators plus is natural air cooling.

Features and Benefits.

• Covered type power supply • Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• DIN Rail Mounted
• Green output indicators
• Natural air cooling
• Power rating 50 W
• Output voltage 24 V dc
• Input voltage 100 V ac to 240 V ac
• Rated output current 2.2 A
• Harmonic current emissions
• Efficiency 80% min.
• Frequency 50/60 Hz
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge. Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.

Standards

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No. 213, EN50178, EN60950-1. Harmonic current emissions conform to EN61000-3-2.

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 2.2 A
Power Rating 50W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 84.5mm
Width 38.6mm
Series S8VM
Depth 138.1mm
Mounting Type DIN Rail Mount
Efficiency 80%
Maximum Temperature +50°C
Ripple And Noise ±0.75%
Load Regulation ±0.8%
MTBF 135000h
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
95,38
(excl. BTW)
115,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 95,38
10 - 14
€ 90,61
15 +
€ 87,75
Related Products
The S8VK-S series of single phase switch mode ...
Description:
The S8VK-S series of single phase switch mode power supplies from Omron are the perfect fit for small control panels. With easy wiring push in plus technology, wiring time can be greatly reduced by up to 60%. Simply push in ...
Omron S8FS-C series of switch mode power supplies ...
Description:
Omron S8FS-C series of switch mode power supplies are a reliable basic power supply with enhanced abnormal over-voltage resistance plus lightening surge protection providing a stable operation. A quality electrolytic capacitor has a longer life 4 times that of previous ...
The S8FS-G series of Switch mode DIN Rail ...
Description:
The S8FS-G series of Switch mode DIN Rail power supplies provide you with excellent standard performance and reliability. They do not require transformers for control circuits plus have in built IEC 61558-2-16 compliant transformers so no need for a transformer ...
mron S8VK-X Switch mode power supply is a ...
Description:
mron S8VK-X Switch mode power supply is a small power supply with communication abilities and an indication monitor. The space saving design allows you to mount power supplies side by side replacing standard power supplies. The S8VK-X24024A-EIP is EtherNet/IP, Modbus ...