Siemens, SIMATIC S7-1200 DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 2.5A Output Current

  • RS-stocknr. 668-0554
  • Fabrikantnummer 6EP1332-1SH71
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: AT
Productomschrijving

S7-1200 Power Supply

The SIMATIC PM 1207 single-phase power supply with automatic range selection of the input voltage is an optimal match to the SIMATIC S7-1200 PLC. It provides the supply to CPUs with 24 V input as well as to signal modules, and to 24 V loads connected to the modules.

Features and Benefits

Connection to all single-phase networks (120 V ac/230 V ac) through automatic range switching Short-term power failure backup
Parallel connection of two load current supplies for enhanced performance
The load current supplies are directly fastened to the S7-1200 mounting rail and can be mounted directly to the left of the CPU (no installation clearance required)
Green LED for status indicator 24 V OK
Two 24 V DC output terminals for connection of 24 V consumers

Product Application Information

The SIMATIC S7-1200 has comprehensive certifications, such as UL, ATEX and DNV GL enabling universal use in various industries.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, CB, FM, ATEX, cCSAus Class I Div 2, GL, ABS, DNV

Siemens 6ep1332-1SH71 Power Supply, 24 V, 2.5 A, 60 W

Siemens S7-1200

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 132V ac
Output Voltage 24 V dc
Output Current 2.5 A
Power Rating 60W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 100mm
Width 70mm
Minimum Temperature 0°C
Mounting Type DIN Rail Mount
Maximum Temperature +60°C
Depth 75mm
Ripple And Noise 150 mV Pk-Pk
Load Regulation 0.2%
Series SIMATIC S7-1200
Hazardous Area Certification ATEX
44 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
73,00
(excl. BTW)
88,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 73,00
10 - 14
€ 70,04
15 +
€ 67,00
Related Products
Universal / full range inputInterchangeable AC plugtops (UK, ...
Description:
Universal / full range inputInterchangeable AC plugtops (UK, Euro, USA and Australia)Level 6 efficiencyCost effective and highly reliable1.8 m DC output cable fitted with 2.1mm DC plug (centre positive).
The DTM165-C8 series has been designed to offer ...
Description:
The DTM165-C8 series has been designed to offer a rugged power supply for use in the medical industry. With a wide input voltage rating and a selection of output voltages, these units are versatile and extremely energy efficient. These units ...
Murrelektroniks Emparro SMPS units have an efficiency rate ...
Description:
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower ...
High quality metal cased switch mode power suppliesDesigned ...
Description:
High quality metal cased switch mode power suppliesDesigned for symmetrical 35mm DIN-railIdeal for process control & machine tool applicationsEMC immunity to EN50082-2EMI to EN55011 Class B, FCC level BLow profileAdjustable output voltageFully regulated output, short circuit protection/current limitOver-voltage ...