Siemens, SIMATIC S7-300 DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 2A Output Current

  • RS-stocknr. 714-1252
  • Fabrikantnummer 6ES7307-1BA01-0AA0
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: RO
Productomschrijving

S7-300 Power Supply

The design and functionality of the SIMATIC PS 307 single-phase power supply with automatic range switchover of the input voltage is an optimal match to the SIMATIC S7-300 PLC. The supply to the CPU is quickly established by means of the connecting comb that is supplied with the system and load current supply. It is also possible to provide a 24 V supply to other S7-300 system components, input/output circuits of the input/output modules and, if necessary, the sensors and actuators.

Features and Benefits

The system and load current supplies are screwed directly onto the S7-300 standard mounting rail and can be mounted directly to the left of the CPU Diagnostic LED for indicating “Output voltage 24 V dc O.K."
ON/OFF switches for possible swapping of modules
Strain-relief assembly for input voltage connection cable
Short-term power failure backup
Output voltage 24 V DC, stabilized, short circuit-proof, open circuit-proof
Parallel connection of two power supplies for enhanced performance

Product Application Information

Comprehensive certifications, such as UL, ATEX and GL enable universal use in various industries.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

Note

Each CPU requires a Micro Memory Card (MMC). Programming may be carried out using the Step 7 Lite software (stock no. 539-1755).

Approvals

CE, cULus, ATEX, cULas Class I Div 2, GL, ABS, DNV

Siemens 6ES73071BA000AA0 Power Supply, 24 V, 2 A, 58 W

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 120 → 230V ac
Output Voltage 24 V dc
Output Current 2 A
Power Rating 48W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 40mm
Series SIMATIC S7-300
Load Regulation 0.2%
Hazardous Area Certification ATEX
Minimum Temperature 0°C
Depth 125mm
Mounting Type DIN Rail Mount
Maximum Temperature +60°C
Ripple And Noise 50 mV PK-PK
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
115,00
(excl. BTW)
139,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 115,00
Related Products
The CP-E range of DIN Rail PSUs from ...
Description:
The CP-E range of DIN Rail PSUs from ABB offer enhanced functionality. The switch mode power supply units are economic and can be operated at an ambient temperature of up to 70°C. With adjustable output voltages, they can also be ...
Primary clocked switching power supply unitsWide input rangeHigh ...
Description:
Primary clocked switching power supply unitsWide input rangeHigh efficiencyAdjustable output voltages (devices > 10 W)Low power loss and low heat developmentFree convection cooling (no forced cooling by fan)Idle, overload and continuous short circuit proofIntegrated input protectionU/I characteristic curve ...
DC-DC Ultra slim Industrial DIN rail converter, Input ...
Description:
DC-DC Ultra slim Industrial DIN rail converter, Input 9-36Vdc, Single Output 24Vdc at 1.25A. Width only 35mm (2SU) 4:1 ultra wide input range-40∼+85°C wide working temperature No minimum load requiredDC output adjustable ( 10%)Cooling by free air convectionCan be installed ...
The 1-phase and 2-phase SITOP modular are technology ...
Description:
The 1-phase and 2-phase SITOP modular are technology power supplies for sophisticated solutions and offer maximum functionality for use in complex plants and machines.The 24 V/5 A and 10 A power supplies in a compact metal enclosure can be accommodated ...