Siemens, SITOP PSU100C DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 4A Output Current

  • RS-stocknr. 741-8704
  • Fabrikantnummer 6EP1332-5BA10
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: RO
Productomschrijving

SITOP Compact Power Supply Unit

The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have low-power losses throughout the entire load range. The losses are low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.

Features and Benefits

• Single phase wide range input from 85 V ac to 264 V ac or 110 V dc to 300 V dc • Small mounting surface due to its slim design
• High efficiency across the entire range
• Low energy consumption during no-load operation or standby
• Adjustable output voltage
• Green LED for "output voltage OK"
• Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection
• Wide temperature range: -20 °C to 70 °C

Product Application Information

To increase the availability, the SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, cCSAus, CB, ATEX, cCSAus Class I Div 2, GL, ABS

Siemens 6EP1332-5BA10 Power Supply, 24 V, 4 A, 96 W

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 4 A
Power Rating 96W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 80mm
Width 52.5mm
Ripple And Noise 200mV Pk-Pk
Output Voltage Adjustment Range 22.2 → 26.4V
Minimum Temperature -20°C
Maximum Temperature +70°C
Mounting Type DIN Rail Mount
Hazardous Area Certification ATEX
Series SITOP PSU100C
Load Regulation 0.2%
Depth 100mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
87,00
(excl. BTW)
105,27
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 87,00
10 - 14
€ 83,46
15 +
€ 79,86
Related Products
The Mean Well GEM series of plug-in power ...
Description:
The Mean Well GEM series of plug-in power supplies are highly reliable wall-mounted single output green medical adapters. Housed in a flame retardant 94V-0 plastic case, these plug-in power supplies effectively protect users from electrical hazards. The GEM series has ...
The RS Pro Class II C8 Inlet Desktop ...
Description:
The RS Pro Class II C8 Inlet Desktop power supply has an output power of 65W and compliant to ErP III (Level VI) efficiency regulations and has a built in short-circuit and over-voltage protector. This power supply is lightweight, simple ...
The mini power supply devices designed into the ...
Description:
The mini power supply devices designed into the LOGO!8 module offer great performance in the smallest space: The excellent efficiency over the complete load range and the low performance loss during idle times guarantee efficient operation. The power supply has ...
The Q-Series DIN rail power supplies from PULS ...
Description:
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help ...