Wago, PCB Jumper, 281 Series

  • RS-stocknr. 180-9252
  • Fabrikantnummer 281-402
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Feed-through connections

Feed-through terminal blocks with cage clamp® connection.

Features and Benefits

• DIN Rail type TS 35
• 3 conductors (1 input, 2 outputs)
• Quick connection using cage-type springs, not affected by impact and vibration
• For rigid, semi-rigid and flexible conductors
• Front wiring

870 Series

Compact screwless DIN rail mount terminals suitable for use with TS35 ’Top Hat’ rails. The compact size of the terminal is possible due to the new cage clamp designed to satisfy the need to reduce cabinet space on site.

Accept cables 0,08 - 2,5 mm²/4 mm² flexible wire
Front cabling enables further space saving
Rated at: 500V/6kV/24A
Jumper bar rated current: 18A
Suitable marker cards and labels also available (each pack contains 5 cards, with 100 markers per card)

Specificaties
Kenmerk Waarde
Accessory Type PCB Jumper
Series 281
For Use With Terminal Block
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 10
0,319
(excl. BTW)
0,386
(incl. BTW)
Bag(s)
Per zak
Per stuk*
10 - 99
€ 0,319
€ 0,032
100 - 249
€ 0,304
€ 0,03
250 +
€ 0,287
€ 0,029
*prijsindicatie
Related Products
These brackets are designed to hold cables and ...
Description:
These brackets are designed to hold cables and flexible conduits for chains and cable-holder sleeves.Electrical cables should be fixed at each end and flexible conduits only at the mobile point.These brackets fit onto a C shaped DIN rail.Brackets are supplied ...
Compact screwless DIN rail mount terminals suitable for ...
Description:
Compact screwless DIN rail mount terminals suitable for use with TS35 ’Top Hat’ rails. The compact size of the terminal is possible due to the new cage clamp designed to satisfy the need to reduce cabinet space on site. Accept ...
Shielded clamping screw to directly contact shielded wires ...
Description:
Shielded clamping screw to directly contact shielded wires and busbarsTransport rails 1000 mm long, tin-coatedDistancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)Insulated holding block for busbars with M4 x 8 mm screen for common shielding ...
Front-entry miniature screwless DIN Rail terminals are designed ...
Description:
Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact ...