U bent doorgestuurd naar RS Nederland
Distrelec is gefuseerd met de RS Group om u een breder productaanbod, plaatselijke ondersteuning en betere services te kunnen bieden.
Phoenix Contact E/MK Series End Stop for Use with DIN Rail Terminal Blocks
- RS-stocknr.:
- 446-0844
- Artikelnummer Distrelec:
- 304-33-771
- Fabrikantnummer:
- 1421633
- Fabrikant:
- Phoenix Contact
Subtotaal (1 verpakking van 10 eenheden)*
€ 4,98
(excl. BTW)
€ 6,03
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 40 stuk(s) klaar voor verzending
- 1.850 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 700 stuk(s) vanaf 19 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 0,498 | € 4,98 |
*prijsindicatie
- RS-stocknr.:
- 446-0844
- Artikelnummer Distrelec:
- 304-33-771
- Fabrikantnummer:
- 1421633
- Fabrikant:
- Phoenix Contact
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Phoenix Contact | |
| Product Type | End Clamp | |
| Accessory Type | End Stop | |
| Series | E/MK | |
| For Use With | DIN Rail Terminal Blocks | |
| Colour | Grey | |
| Material | Polyamide | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Alles selecteren | ||
|---|---|---|
Merk Phoenix Contact | ||
Product Type End Clamp | ||
Accessory Type End Stop | ||
Series E/MK | ||
For Use With DIN Rail Terminal Blocks | ||
Colour Grey | ||
Material Polyamide | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
- Land van herkomst:
- PL
Phoenix Contact End Clamp, 6.2mm Width, PA Construction - E/MK - 1421633
Worried about terminal blocks going off the rails? Put a stop to slippage with this end clamp from Phoenix Contact. It has two clips, meaning it has no trouble gripping perforated and unperforated top-hat DIN rails.
A 3.2mm fixing hole through the body means you can clamp it onto the end of a terminal strip with a single screw. As installation can be completed with just a screwdriver, it's swift and fuss-free.
As it's made from PA, the clamp has good mechanical damping properties that help it stand its ground around machine vibrations. This material also resists wear, so it stays strong over time. Use two of these end clamps to bookend your blocks and make sure they don't slide around. This ensures your distribution and control panel installations are safe and secure.
Features & Benefits
• Compact width of 6.2mm saves you space and enables installation in small enclosures
• Flame-retardant construction is tested to ensure vertical burning stops within 60 seconds
• Operates at temperatures between -60°C and +105°C, to handle heavy plant and manufacturing environments
• Comes in a pack of ten, so you can secure blocks on multiple rails
Gerelateerde Links
- Phoenix Contact E/MBK Series End Stop for Use with DIN Rail Terminal Blocks
- Phoenix Contact E/AL-NS 35 Series End Stop for Use with DIN Rail Terminal Blocks
- Phoenix Contact E/UK-NS 35 Series End Stop for Use with DIN Rail Terminal Blocks
- Phoenix Contact E/NS 35 N Series End Stop for Use with DIN Rail Terminal Blocks
- Phoenix Contact E/MK Series End Clamp for Use with DIN Rail NS 15
- Phoenix Contact CLIPFIX Series End Stop for Use with DIN Rail Terminal Blocks, ATEX
- Phoenix Contact CLIPFIX 35 Series End Stop for Use with DIN Rail Terminal Blocks
- Phoenix Contact CLIPFIX 15 Series End Stop for Use with DIN Rail Terminal Blocks