UT-COMBI CONNECTOR UPBV 2,5/ 4

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

UT-COMBI connectors

Pull-out multi-pole connectors for CLIPLINE COMBI terminal blocks.
Screw connection.

CLIPLINE COMBI terminal blocks

A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect terminal blocks and pluggable connectors, whatever their connector type. Both the bases and connectors are protected from coming into contact with hands. Self-stripping connections (QT-COMBI): Wiring time is reduced by up to 60%, as cables need not be stripped.A screwdriver is used to lock the self-stripping mechanism. Spring terminals (ST - COMBI): The connection point is opened using a screwdriver to lever the spring. This technology provides constant contact force for vibration-proof use. Screw connection (UT - COMBI): Universal terminal enabling a multi-conductor connection.

Specificaties
Kenmerk Waarde
Series UPBV 2.5/ 4
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
30 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
Was € 2,83
2,492
(excl. BTW)
3,015
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,492
€ 12,46
25 - 45
€ 2,39
€ 11,95
50 +
€ 2,314
€ 11,57
*prijsindicatie
Related Products
Feed-through terminal blocks with cage clamp® connection. • ...
Description:
Feed-through terminal blocks with cage clamp® connection. • DIN Rail type TS 35• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Two permissible wire cross-sections, ...
Feed-through terminal blocks with cage clamp® connection. • ...
Description:
Feed-through terminal blocks with cage clamp® connection. • DIN Rail type TS 35• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring.
These brackets are designed to hold cables and ...
Description:
These brackets are designed to hold cables and flexible conduits for chains and cable-holder sleeves.Electrical cables should be fixed at each end and flexible conduits only at the mobile point.These brackets fit onto a C shaped DIN rail.Brackets are supplied ...
Grey terminal blocks for TS 35 rail using ...
Description:
Grey terminal blocks for TS 35 rail using CAGE CLAMP technology®S technology, and 30% smaller than standard terminal blocks. Direct plug-in of rigid and flexible conductors with end tips, no tools required.Simple and quick bridging and test system.Easy and quick ...