Entrelec Fused DIN Rail Terminal, M Series, 10 (solid) mm², 6 (stranded) mm², 750 V, 10A

  • RS-stocknr. 425-948
  • Fabrikantnummer 1SNA115377R2400
  • Fabrikant Entrelec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Fused Terminals

Two versions of fused terminals
The latched, pull up fuse terminals are available for 1 1/4 in. x 1/4 in., BS1362 and 5x20mm/5x25mm fuses
The screw cap fused terminals are suited to 5x20mm fuses and is available with or without a neon (110-220V) indicator

Note

The fuseholder limits the rating to 250V/16A irrespective of markings on the terminals

Approvals

UL listed, CSA certified.

Approvals

1, 2

5000 Universal Series

This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569

Note

Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only

Specificaties
Kenmerk Waarde
Series M
Wire Size 8 AWG
Fused Yes
Cable CSA 6 (stranded) mm², 10 (solid) mm²
Colour Grey
Current Rating 10A
Termination Method Screw
Voltage Rating 750 V
Pitch 16mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +110°C
115 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
405 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
3,92
(excl. BTW)
4,74
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 3,92
€ 19,60
*prijsindicatie
Related Products
The Weidmuller ’W’ series fused terminals with standard ...
Description:
The Weidmuller ’W’ series fused terminals with standard screw clamp technology gives you short circuit and overload protection. Screw clamp connectionEasy snap-on mountingCurrent Rating 6.3 Amps.
ABB series of Fused terminals with a lever ...
Description:
ABB series of Fused terminals with a lever action fuse carrier, the standard product accepts both 20´5mm and 25´5mm fuses whilst terminals with ’fuse failed’ indication are suited to 20´5mm fuse links only.Fuse failed indication terminals are available either a ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This Weidmüller Fuse terminal is available in two ...
Description:
This Weidmüller Fuse terminal is available in two different types, Fuse terminal with pivoting retaining lever and Fuse terminal with plug in SIHA fuse holder. The fuse holder is opened lever style and the fuse is shrouded when installed,Single LED ...