Weidmuller Fused DIN Rail Terminal, WSI Series, 10 → 36 V dc, 6.3A, 5 x 20mm Fuse, Beige Single

  • RS-stocknr. 235-5352
  • Fabrikantnummer 1011300000
  • Fabrikant Weidmüller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Fused LED

This Weidmüller Fuse terminal is available in two different types, Fuse terminal with pivoting retaining lever and Fuse terminal with plug in SIHA fuse holder. The fuse holder is opened lever style and the fuse is shrouded when installed,Single LED indicates fuse failure

Note

The voltage and current ratings are to VDE ratings.

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Warning

  • With blown fuse the follow on circuit is still under current. Disconnect lever to open circuit.
Specificaties
Kenmerk Waarde
Series WSI
Wire Size 20 → 8 AWG
Colour Beige
Current Rating 6.3A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 10 → 36 V dc
Pitch 7.9mm
Minimum Operating Temperature -50°C
Maximum Operating Temperature +120°C
79 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
282 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
10,23
(excl. BTW)
12,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 10,23
Related Products
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This flexible terminal block enables a fuse connection ...
Description:
This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted. ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...