Weidmuller Fused DIN Rail Terminal, KDKS Series, 500 V, 6.3A, 5 x 20mm Fuse, Brown Double

  • RS-stocknr. 268-1623
  • Fabrikantnummer 9503310000
  • Fabrikant Weidmüller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: RO
Productomschrijving

Fused, Feedthrough and Earth

This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted.

Note

The voltage and current ratings are to VDE ratings.

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

Approvals

UL

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Warning

  • With full blown fuse the follow on circuit is still under current. Disconnect lever to open circuit.
Specificaties
Kenmerk Waarde
Series KDKS
Wire Size 26 → 12 AWG
Fused Yes
Colour Brown
Current Rating 6.3A
Number of Levels Double
Termination Method Screw
Voltage Rating 500 V
Pitch 8mm
Minimum Operating Temperature -50°C
Maximum Operating Temperature +100°C
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
755 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
6,13
(excl. BTW)
7,42
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 6,13
€ 30,65
*prijsindicatie
Related Products
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
Compact screwless DIN rail mount terminals suitable for ...
Description:
Compact screwless DIN rail mount terminals suitable for use with TS35 ’Top Hat’ rails. The compact size of the terminal is possible due to the new cage clamp designed to satisfy the need to reduce cabinet space on site. Accept ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...