2 Way Through Hole DIP Switch SPST, Extended Slide Actuator

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

TE Connectivity ADE and ADF Series DIP Switches

ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush slide actuators. Both versions of these DIP switches have a high pressure contact system and are auto insertable.

High pressure wiping contact allows aqueous or solvent cleaning without tape seal
Can withstand vapour phase reflow or wave soldering conditions
Contact resistance: 50mΩ

Note

Unless stated otherwise, these switches are not suitable for immersion cleaning

Specificaties
Kenmerk Waarde
Contact Configuration SPST
Contact Current Rating 100 mA @ 24 V dc
Contact Material Copper Alloy
Number of Positions 2
Mounting Type Through Hole
Actuator Type Extended Slide
Package Style DIP
Mechanical Life 1000Cycles
Maximum Operating Temperature +85°C
Minimum Operating Temperature -30°C
Operating Temperature Range -30 → +85°C
300 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 60)
0,594
(excl. BTW)
0,719
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
60 +
€ 0,594
€ 35,64
*prijsindicatie
Related Products
Connector, High contact reliability, Long stroke of 7.5mm. ...
Description:
Connector, High contact reliability, Long stroke of 7.5mm. High contact reliability:The contact part has a self-cleaning function.Long Stroke:Full strokeʹ7.5mmSnap-in Panel MountingConnector Socket:The terminal section can be one touch to the contactor.This can shortener lead wire installation time.
Detector Switches are used to detect mechanical movements ...
Description:
Detector Switches are used to detect mechanical movements and convert those or human manual operations, such as the closing of a mobile phone, to electronic signals. In some applications Detector Switches have been used to replace Encoders as a low ...
Available in a choice of configurationsChangeover (SPDT) types ...
Description:
Available in a choice of configurationsChangeover (SPDT) types have break-before-make contacts (pairs of pins along one side of the switch must be commoned to achieve a changeover action)Suitable for dry circuit switchingNon switching rating: 5A @ 100VacContact resistance: 10mΩ.
The NDSR series are SPST through-hole switches with ...
Description:
The NDSR series are SPST through-hole switches with a recessed actuator and they are available in an array of positions. Applications include telecom, computers, test equipment, security and instrumentation. Operation force 10N max 2mm Stroke 25mA 24Vdc, switching rating 100mA ...