4 Way Through Hole DIP Switch Single Pole Single Throw (SPST), Standard Actuator

  • RS-stocknr. 177-4163
  • Fabrikantnummer 206-4ST
  • Fabrikant CTS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

CTS slide DIP Switch versions are available in a broad range of low profile, half pitch (.05 inch), standard pitch (.1 inch), through hole, and surface mount options. We offer top, right angle, or side actuation styles. Additionally, our unique design & construction allows for superior ESD protection in many of our DIP switch products.

The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV when the OFF side terminals are connected to ground. The optimized contact design incorporating a dimple-to-flat surface wiping interface provides long-term contact corrosion resistance making this the ideal choice for any HVAC, server, or security system.

Available with SPST, SPDT, DPST, 3PST circuit choices
Available with low profile, standard, or extended actuator heights. Consult the ordering information for options.

Specificaties
Kenmerk Waarde
Contact Configuration Single Pole Single Throw (SPST)
Contact Current Rating 50 (Switching) mA, 100 (Non Switching) mA
Number of Positions 4
Mounting Type Through Hole
Actuator Type Standard
Package Style DIP
Maximum Operating Temperature +85°C
Minimum Operating Temperature -55°C
Operating Temperature Range -55 → +85°C
Dielectric Strength 500V ac
Voltage Rating 24 V dc, 50 (Non Switching) V dc
990 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 45)
0,804
(excl. BTW)
0,973
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
45 - 2205
€ 0,804
€ 36,18
2250 - 4455
€ 0,749
€ 33,705
4500 +
€ 0,709
€ 31,905
*prijsindicatie
Related Products
Two sliding contact mechanismGold plated contactsCover - Self ...
Description:
Two sliding contact mechanismGold plated contactsCover - Self extinguishing certified materialBase providing high arc and high insulation resistanceSlanted terminalsEnd to end stackableTerminal spacing conforms to standard. 2.54mm PCB grid.
ADE and ADF series through hole mounting 7.5 ...
Description:
ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush ...
Suitable for wave solderingSuitable for immersion washingOn/Off position ...
Description:
Suitable for wave solderingSuitable for immersion washingOn/Off position clearly indicated by ’’ON’’ labelExtended actuatorsNo switching rating: 100mA @ 50VdcContact resistance: 50mΩ.
High pressure wiping contact allows aqueous or solvent ...
Description:
High pressure wiping contact allows aqueous or solvent cleaning without tape sealCan withstand vapour phase reflow or wave soldering conditionsContact resistance: 50mΩ.