12 Way Surface Mount DIP Switch 12P12T, Flush Slide Actuator

  • RS-stocknr. 179-7224
  • Fabrikantnummer SDB12H0SBD
  • Fabrikant C & K
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

C&K’s SDB series cost effective low profile DIP switches are used by designers as address switches for industrial controls, for logic switching in computers and peripherals and for function controlling in numerous additional applications. The low-profile design of the switches save space and come available in thru-hole and surface mount models, with tape and reel packaging available.

Low profile design saves space
Thru-hole and surface mount models
Tape and reel packaging available
Top tape seal options
Address switch for industrial controls
Logic switching for computers and peripherals
Function controlling for numerous applications

Specificaties
Kenmerk Waarde
Contact Configuration 12P12T
Contact Current Rating 100 mA
Contact Material Phosphor Bronze
Number of Positions 12
Mounting Type Surface Mount
Actuator Type Flush Slide
Package Style DIP
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +85°C
Dielectric Strength 300 (Minimum)V dc
Voltage Rating 50V dc
30 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 15)
1,447
(excl. BTW)
1,751
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
15 +
€ 1,447
€ 21,705
*prijsindicatie
Related Products
Sub-miniature switches in a choice of configurations and ...
Description:
Sub-miniature switches in a choice of configurations and actions. Note that these switches are not suitable for immersion cleaning unless stated otherwise. Gold wiping contact systemContact resistance: 100mΩInsulation resistance:100 MΩ @ 250VdcLow profile with tape sealMechanical life: 1000 Cycles.
The CTS is an 8-way through hole mount ...
Description:
The CTS is an 8-way through hole mount DIP SPST switch. Its unique design and construction provides superior ESD protection. When the OFF side terminals are connected to the ground, they are moulded into the thermoset base and provides electrostatic ...
Through board mount DIL switches designed to DIL ...
Description:
Through board mount DIL switches designed to DIL standards. Allow automatic mounting with IC insertion machines. Through board mountingSeal tape versions availableGold plated contactsContact resistance: 200mΩ maxInsulation resistance: 100MΩ min at 250VdcRoHS compliantMechanical life: 1000 operations.
The low profile IKD DIP switch is designed ...
Description:
The low profile IKD DIP switch is designed for reliable operation with positive detent action. Available 1 to 12 poles, surface mount or through hole mounting. Self cleaning wiping contactsGold plated terminalsSMT Gull wing or J bendProcess compatible IP reflow ...