8 Way Through Hole DIP Switch 8P

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity ADE and ADF Series DIP Switches

ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush slide actuators. Both versions of these DIP switches have a high pressure contact system and are auto insertable.

High pressure wiping contact allows aqueous or solvent cleaning without tape seal
Can withstand vapour phase reflow or wave soldering conditions
Contact resistance: 50mΩ

Note

Unless stated otherwise, these switches are not suitable for immersion cleaning

Specificaties
Kenmerk Waarde
Contact Configuration 8P
Contact Current Rating 100 mA@ 24 V dc
Contact Material Gold over Nickel Plated Copper Alloy
Number of Positions 8
Mounting Type Through Hole
Actuator Type Slide
Package Style DIP
Maximum Operating Temperature +85°C
Minimum Operating Temperature -30°C
Operating Temperature Range -30 → +85°C
630 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1,56
(excl. BTW)
1,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 1,56
50 - 99
€ 1,43
100 - 249
€ 1,37
250 - 499
€ 1,19
500 +
€ 1,13
Verpakkingsopties
Related Products
Contact rating: 0.4VA @ 20Vdc maxContact resistance: 50mΩ ...
Description:
Contact rating: 0.4VA @ 20Vdc maxContact resistance: 50mΩ maxLife expectancy: 10000 rotationsTemperature range: -30 to +85°C5-second resistance to wave soldering at 285°C (mounted on 1.5mm card)Resistant to ultrasound cleaning in a solvent solution, 10% contaminated by fluxing agentGold plated contacts. ...
The CTS is a 4-way surface mount DIP ...
Description:
The CTS is a 4-way surface mount DIP SPST switch. It has a low profile actuator. The contacts are made from gold plated beryllium copper material. Its unique design and construction provides superior ESD protection. The switch has a top ...
Enabling reliable ON/OFF switching of PCB track signals ...
Description:
Enabling reliable ON/OFF switching of PCB track signals using a 2.54mm pitch. These switchable jumpers provide an alternative to conventional jumper links by eliminating the need for 'parking pins' on the PCB or exposing bare pins. Available in single or ...
Sub-miniature switches in a choice of configurations and ...
Description:
Sub-miniature switches in a choice of configurations and actions. Note that these switches are not suitable for immersion cleaning unless stated otherwise. SMD mounting height 2.5mm low profile designComplies with EIAJ SOP standard outline dimensionsSeal tape typeExcellent contact stability with ...