2 Way Through Hole DIP Switch SPST, Extended Slide Actuator

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity ADE and ADF Series DIP Switches

ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush slide actuators. Both versions of these DIP switches have a high pressure contact system and are auto insertable.

High pressure wiping contact allows aqueous or solvent cleaning without tape seal
Can withstand vapour phase reflow or wave soldering conditions
Contact resistance: 50mΩ

Note

Unless stated otherwise, these switches are not suitable for immersion cleaning

Specificaties
Kenmerk Waarde
Contact Configuration SPST
Contact Current Rating 100 mA@ 24 V dc
Contact Material Copper Alloy
Number of Positions 2
Mounting Type Through Hole
Actuator Type Extended Slide
Package Style DIP
Mechanical Life 1000Cycles
Maximum Operating Temperature +85°C
Minimum Operating Temperature -30°C
Operating Temperature Range -30 → +85°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-01-2020, met een levertijd van 1 werkdag.
Prijs Each (In a Pack of 5)
Was € 0,65
0,29
(excl. BTW)
0,35
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 245
€ 0,29
€ 1,45
250 - 495
€ 0,276
€ 1,38
500 - 1245
€ 0,264
€ 1,32
1250 - 2495
€ 0,256
€ 1,28
2500 +
€ 0,248
€ 1,24
*prijsindicatie
Verpakkingsopties
Related Products
CTS slide DIP Switch versions are available in ...
Description:
CTS slide DIP Switch versions are available in a broad range of low profile, half pitch (.05 inch), standard pitch (.1 inch), through hole, and surface mount options. We offer top, right angle, or side actuation styles. Additionally, our unique ...
The CTS DIP switch is a 4 way ...
Description:
The CTS DIP switch is a 4 way single pole single throw (SPST) contact configuration switch. It has standard actuator with through hole mounting type switch. Its unique design and construction provides superior ESD protection. When the off side terminals ...
Enabling reliable ON/OFF switching of PCB track signals ...
Description:
Enabling reliable ON/OFF switching of PCB track signals using a 2.54mm pitch. These switchable jumpers provide an alternative to conventional jumper links by eliminating the need for 'parking pins' on the PCB or exposing bare pins. Available in single or ...
A range of PCB mount sealed rotary DIP ...
Description:
A range of PCB mount sealed rotary DIP switches. Series includes a standard type that can be operated from the top or side, spindle shaft type that can be operated while mounted on a panel, along with thumbwheel and flat ...