4D Systems, 1.7in Arduino Compatible Display

  • RS-stocknr. 171-1828
  • Fabrikantnummer UOLED-160G2-AR
  • Fabrikant 4D Systems
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino

The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

Features

GOLDELOX processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
2 x GPIO pins
I2C and UART serial communications
Powered from Arduino

Kit Contents

OLED Display Module
4D Arduino adapter shield
Female to female 150mm 5-way jumper cable
5 way male to male adapter
Quick start user guide

Note

Arduino MCU module is not included.

4D Systems Passive Matrix OLED Displays

Specificaties
Kenmerk Waarde
Diagonal Display Size 1.7in
Display Resolution 160 x 128pixel
Viewing Area Dimensions 33.6 x 27.0mm
Dimensions 52.0 x 36.0 x 15.5mm
For Use With Arduino
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 25)
55,99
(excl. BTW)
67,75
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
25 - 25
€ 55,99
€ 1.399,75
50 +
€ 51,826
€ 1.295,65
*prijsindicatie
Related Products
The Sensitec EBK7000 is an Angle and Length ...
Description:
The Sensitec EBK7000 is an Angle and Length measurement evaluation kit using MagnetoResistive Sensor Technology. Built as an Arduino microcontroller system extension board, the EBK7000 evaluation kit allows users to learn differing factors impacting upon measurement signal resolution. Allowing for ...
The circuit can process up to four independent ...
Description:
The circuit can process up to four independent thermocouple channels, and the software linearization algorithms support eight different types of thermocouples (B, E, J, K, N, R, S, and T). The four thermocouples can be connected in any combination, and ...
Its heart is a dual channel H-bridge driver ...
Description:
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino. Both motors can be driven simultaneously while ...
The CleO graphics display panel allows easy development ...
Description:
The CleO graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 3.5in 320 ...