Phoenix Contact Motor Protection Circuit Breaker CLIPLINE

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Thermomagnetic Circuit Breakers UT-TMC

The UT 6-TMC thermomagnetic circuit breakers ensure high system availability with the ability to re-connect with a clear status indication. They become integrated in the CLIPLINE complete system via the plug-in bridge shaft and can be clearly allocated with the large-surface centre marking.

Compact design, only 12.3 mm wide
Large-surface marking possibilities, 1 per connection point and 1 on top of the device
Double plug-in bridge shaft
Available in current ranges 0.5 A to 16 A

CLIPLINE COMBI terminal blocks

A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect terminal blocks and pluggable connectors, whatever their connector type. Both the bases and connectors are protected from coming into contact with hands. Self-stripping connections (QT-COMBI): Wiring time is reduced by up to 60%, as cables need not be stripped.A screwdriver is used to lock the self-stripping mechanism. Spring terminals (ST - COMBI): The connection point is opened using a screwdriver to lever the spring. This technology provides constant contact force for vibration-proof use. Screw connection (UT - COMBI): Universal terminal enabling a multi-conductor connection.

Specificaties
Kenmerk Waarde
Range CLIPLINE
Voltage Rating 28 V dc, 240 V ac
Series UT 6-TMC M 2A
43 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
82 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,29
(excl. BTW)
13,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,29
Related Products
The MICO Classic range by Murr Elektronik are ...
Description:
The MICO Classic range by Murr Elektronik are an intelligent power distribution system for 24 V dc systems. MICO monitors currents and indicates via the LED when the maximum load is being approached, the current range can then be adjusted. ...
Motor protectionRotary knob typeRanges 55...100A (3 choices)IEC breaking ...
Description:
Motor protectionRotary knob typeRanges 55...100A (3 choices)IEC breaking capacity Icu at 400V: 50kAThermal and magnetic trip indicatorUL 508 Type E via accessory.
Maximum rated current 100A (45kW @ 400V a.c.)Rated ...
Description:
Maximum rated current 100A (45kW @ 400V a.c.)Rated operational voltage: 690VShort-circuit proof to 50kA @ 400V a.c.Maximum switching frequency; 15 operations/hourMechanical life; 105 operationsAmbient temperature range; –20 to +60 ° CLong term stabilityManual resetLockable in off position.
Overload protection compensated -5 to +40°CLockable in 'OFF' ...
Description:
Overload protection compensated -5 to +40°CLockable in 'OFF' positionShort circuit protection, therefore, no back-up fuse protection is required where the prospective fault level is less than the breaking capacity of the unitExpected life cycles 0.1 x 106Maximum switching frequency 40 ...