RS PRO Door Entry with Access Control Kit with Keypad

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

One K6 Access Control Kit with Keypad and Magnetic Lock

12 Vdc 2 Amp boxed power supply
DG0180 digital keypad supports 500 users
10001 magnetic lock
DRB001N-PTE exit button
CP-15 break glass unit

Note

The RS Access Control Kits provide a single access control solution, in one box, for one access door. Everything required to install access control is provided in each kit, including an enclosure with boxed 2A power supply, a keypad or proximity system, exit buttons, magnetic locks and break glass units depending on the specfic kit chosen. Also within this range is a large choice of access control equipment available separately.

Specificaties
Kenmerk Waarde
System Type Access Control Kit
Components Included Break Glass Box, Exit Button, Keypad, Power Supply
Supply Voltage 12V dc
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
358,53
(excl. BTW)
433,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 358,53
Related Products
These RS electro-permanent magnets provide a holding force ...
Description:
These RS electro-permanent magnets provide a holding force when de-energised and release when pulsed.Typical applications include: machine mechanisms, door/guard locking and remote hold / release requirements.Optimum performance when used with RS armature plates (available separately): please see stock no 739-3211 ...
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at ...
Description:
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsDimensions: 85x85x35mm (Lock)Dimensions: 65x65x40mm (Armature plate)Over-ride switchBrushed stainless steel.
Power input: 12Vdc or 24VdcVoltage tolerance: +/-15%Current draw: ...
Description:
Power input: 12Vdc or 24VdcVoltage tolerance: +/-15%Current draw: 125mA at 12Vdc 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsOver-ride switchWall mountBlack powder-coat finish.
Operating voltage: 12 or 24VdcAluminiumCurrent draw: 500mA at ...
Description:
Operating voltage: 12 or 24VdcAluminiumCurrent draw: 500mA at 12Vdc250mA at 24Vdc (at temperature 20 °C)(SPDT rated 3A at 12Vdc)Status LED lightsOperating temperature: -10 to 55 °C (14 to 131 °F)Humidity: 0 to 95% non-condensingLock’s surface temperature: Current temperature +/-20% (when ...