DPDT-NO Microswitch, 10.1 A @ 250 V ac

  • RS-stocknr. 699-0439
  • Fabrikantnummer AGX706F
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Small Interlock Switch (Light Force)

These safety interlock switches are compact and use a light force, typical applications include door interlocks for copiers, printers, fax machines and other compact appliances.

Constructed with dual restoration springs and double cut-off for safety
Contact gap greater than 4mm conforming to IEC60950-1

Approvals

UL/C-UL/ENEC/VDE

Specificaties
Kenmerk Waarde
Contact Configuration DPDT-NO
Contact Current Rating 10.1 A @ 250 V ac
Terminal Type Tab
Actuator Type Plunger
Contact Material Silver Cadmium Oxide
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Operating Temperature Range -25 → +85°C
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
10,00
(excl. BTW)
12,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 10,00
Related Products
The Marquardt 1115 Series and 1117 Series are ...
Description:
The Marquardt 1115 Series and 1117 Series are single pole snap action switches with high switching capabilities of up to 16A. Actuators on both the 1115 Series and 1117 Series snap action switches are able to operate in most directions ...
The Saia-Burgess door interlock is single pole single ...
Description:
The Saia-Burgess door interlock is single pole single throw (SPST) momentary push button switch. It has a special feature of optional reset spring for better security. Its required contact current rating is 16A with 250VAC voltage rating. The action of ...
Double pole, single throw, normally open8mm contact gap8mm ...
Description:
Double pole, single throw, normally open8mm contact gap8mm creepage & air gap clearanceMaintenance override key suppliedShrouded actuator to prevent accidental operationThrough hole or snap-in panel mountingOptional terminal shroudContact Rating -16 A; 250 Vac6.3mm Faston terminals.
In rest position, plunger exerts no force on ...
Description:
In rest position, plunger exerts no force on switchSwitch has built in override facility for maintenanceLong over travelThe plunger has a tapped (4 BA) hole making it suitable for additional user attachmentsContact Rating - 15 A at 250VacSolder connection.