RS PRO Motion Sensor Surface Mount

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS Pro Grade 3 Surface Mounted Motion Sensor

Grade 3 Motion and Shock Sensor includes an independent fault output with on-board selectable resistors for use in a triple End of Line configuration, and remote LED indication input. The detection sensitivity can be selected with a dualrange pot, and all features, including pulse count, can be locally configured with jumpers

Separate shock and or vibration sensing
Tamper switch for cover and cable entry point
Activation LED to assist setting up
Adjustable pulse count to eliminate false triggers
Grade 3
Teachable vibration and motion calibration
BS EN50131-2-6 Approved
LED status indicators
Heartbeat pulse indication showing active
Selectable resistors

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Activation Type Tamper Switch
Colour White
Depth 25 mm
Height 22 mm
Width 88mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
55,97
(excl. BTW)
67,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 55,97
Related Products
Dialight's 597 series are CBI® circuit board indicators ...
Description:
Dialight's 597 series are CBI® circuit board indicators from the Micro LED® family. The 597 series devices consist of a surface mount (SMD) LED within a plastic housing. Available in a range of colours, the LED has a flat diffused ...
CLOUDSPLITTER Cat 5e EIA 568-C.2 compliant SMT right ...
Description:
CLOUDSPLITTER Cat 5e EIA 568-C.2 compliant SMT right angle RJ45 shielded modular jacks with a high signal performance and integrated LED status for link activity and network speed verification. These PoE cat 5e shielded RJ45 connectors accept standard RJ45 shielded ...
Magnetic proximity switches are very tolerant to misalignment ...
Description:
Magnetic proximity switches are very tolerant to misalignment and are particularly suited to environments contaminated by dust, dirt, liquid andwhere non-contact switching or hygiene is a consideration.This is a general purpose industrial quality limit, position, security, switch which is fully ...
For surface or flush mountingDesigned for semi-cylindersEffective safety ...
Description:
For surface or flush mountingDesigned for semi-cylindersEffective safety with core pull protection, which protects the cylinders from being drilled out and pulled offSabotage protection with cover and wall switchesTwo integrated LEDs for status displayTwo switching contacts configurable as switches or ...