RS PRO 2-Piece Step Drill Bit Set for Metal, 31mm Max, 5mm Min, HSS Bits
- RS-stocknr.:
- 499-302
- Fabrikant:
- RS PRO
3 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs 1 set
€ 143,61
(excl. BTW)
€ 173,77
(incl. BTW)
| Set(s) | Per set |
| 1 + | € 143,61 |
- RS-stocknr.:
- 499-302
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Sheet metal hole cutter, spiral tap, TiAlN
HSS hole cutter with spiral tap
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Supplied with
Set, stock no. 499-302 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm
Specificaties
Kenmerk | Waarde |
|---|---|
| Drilling Application | Metal |
| Drill Bit Type | Step Drill Bit |
| Material | HSS |
| Number of Pieces | 2 |
| Minimum Size | 5mm |
| Maximum Size | 31mm |
| Set Contents | Step Drill Bits |