Interroll M8 Motorised Drive Roller, 50mm x 300mm

  • RS-stocknr. 437-2797
  • Fabrikantnummer 8AFKJAE6FT/H50T
  • Fabrikant Interroll
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Interroll Motorised Drive Roller

The Interroll BT100 series motorised driver roller has a length of 450mm and a diameter of 50mm. This electrically driven roller has a gear ratio of 21:1 and spindle thread size is M8. It replaces external components such as motors and gears that require frequent maintenance. This device can be used in dusty and/or moist environments. Additionally, the roller is powered by a brushed, mechanically commutated 24VDC motor.
Note:
Should not be used with Thyristor controlled power supply units.

Features and Benefits

Grooved to provide the drive to 9 slave rollers
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute

Certifications

IP54 rated

Specificaties
Kenmerk Waarde
Component Type Motorised Drive Roller
Roller Diameter 50mm
Roller Length 300mm
Load Capacity 120kg
Ratio 21
Spindle Thread Size M8
Maximum Conveying Speed 24m/min
Maximim Motor Voltage 30V
Minimum Motor Voltage 18V
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
365,86
(excl. BTW)
442,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 365,86
5 - 9
€ 354,58
10 +
€ 342,98
Related Products
PVC rollers offer sound insulation, resistance to chemicals ...
Description:
PVC rollers offer sound insulation, resistance to chemicals and corrosion, impact resistance and reduced susceptibility to marking products. They are low in weight and easy to clean. These are fitted with roller bearings and have spring-loaded spindles. They are available ...
Tried and tested a million times over - ...
Description:
Tried and tested a million times over - universal roller with an extensive range of applicationsSilent conveyor roller - Precision ball bearing, technopolymer bearing housing and seal Protects the ball bearing from coarse dirt and water- Integral water-repellent groove Axial ...
Igus® range of knife-edge conveyor pulleys provide precise ...
Description:
Igus® range of knife-edge conveyor pulleys provide precise and lubricant-free deflection for conveyor technology applications. This product range has three iglidur® materials available: the universal iglidur® P210 the FDA compliant iglidur® A180 (up to 90°C) and the iglidur® A350 (up ...
Heavy duty roller track constructed from galvanised steel, ...
Description:
Heavy duty roller track constructed from galvanised steel, incorporating 50mm diameter dual ball race rollers pitched at 104mm. The roller track may carry a maximum load of 40kg per roller.