Surface Mount Ducted Fan, 100mm

  • RS-stocknr. 884-0988
  • Fabrikantnummer SDX100
  • Fabrikant Vent-Axia
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Vent-Axia EuroSeries® (SDX) In-Line Centrifugal Duct Fans

The Vent-Axia SDX Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and external rotor motor to ensure a compact design, high performance and low sound levels.

The in-line fan casing is constructed from pressed steel and incorporates an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit whilst maintaining minimum noise levels. All models are supplied with a simple mounting foot for ease of installation.

The SDX range is available in three model sizes: 100, 150 and 315mm diameter as standard performance. The range provides a performance up to 0.372m³/s with a maximum pressure development of 500 Pa.The SDX range is suitable for the extract of clean air only. It is not suitable for extracting or transporting grinding dust, soot, explosive or other aggressive gases etc.

The impellers are aerodynamically designed centrifugal backward curved type, manufactured by injection moulding of a polypropylene resin. The motor and impeller is factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3.

All units are fitted with motors protected to IP44, insulation Class B and are suitable for temperatures ranging from -25°C to +60°C with humidity levels of up to 95% RH ensuring reliable operation. All sizes are for a 220V/1/50Hz electrical supply and incorporate a manual reset thermal protection device.

Choice:
884-0988: Euro Series SDX 100 (100mm)
884-0982: Euro Series SDX 150 (150mm)
884-0991: Euro Series SDX 315 (315mm)

Available in sizes 100, 150 and 315 mm
Motor Insulation Class B, protected to IP44
Operating Temperatures from -25°C up to +60°C
All units suitable for speed control
Quality Assurance to BS EN ISO 9001:1994
Performance tested to BS848 Part 1 1980

Approvals

BS848 Part 1 1980

Wall / Ceiling Extractor Fans

Specificaties
Kenmerk Waarde
Air Flow 212m³/h
Duct Diameter 100mm
Mounting Surface Mount
Configuration Rectangular
Special Features Four Sealing Rings, Weather Tight Fit
Termination Type Quick Connect
Series Euro
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
169,38
(excl. BTW)
204,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 169,38
Related Products
Fans with encapsulated ball bearings 4-pole, equipped with ...
Description:
Fans with encapsulated ball bearings 4-pole, equipped with a yellow chrome-plated protective grille located on the inlet side.The helix is made of galvanised steel with a black paint coating.The fans are produced with a single-phase external rotor with phase-shifting rings ...
San Ace IP68 fans offer protection against dust, ...
Description:
San Ace IP68 fans offer protection against dust, water jets and water immersion of up to 1m. Encapsulated motor with dual stainless steel ball bearingLong life of 86,000 hrs (60/80mm) / 65,000 hrs (92/119mm) at 40°C ambient temp3rd wire pulse ...
Housed within the 1.5mm high-grade steel bodies these ...
Description:
Housed within the 1.5mm high-grade steel bodies these compact, rugged, reliable and built to last powerful ventilation fans can deliver up to 3600m3/hr at 343 pa. Diameter: 300mmAirflow: 3600m3/hrStatic Pressure: 343PaWeight: 14kgDimensions: 44cm x 37cm813-2786 is supplied fitted with a ...
Powerflow models provide a compact yet versatile range ...
Description:
Powerflow models provide a compact yet versatile range designed with the installer in mind, combining the acoustic benefits of a tough plastic casing with the pressure characteristics of a centrifugal fan.Powerflow has 50-80mm long inlet and discharge spigots allowing easy ...