In Line Ducted Fan, 100mm

  • RS-stocknr. 892-8713
  • Fabrikantnummer ACM100T
  • Fabrikant Vent-Axia
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Vent Axia ACM In-Line Mixed Flow Duct Fans

Vent Axia ACM in-line mixed flow duct fans specifically designed for rigid and flexible ducting offering 2 times the pressure development of conventional axial fans.

Designed and manufactured in the UK
Supplied complete for installation
Can operate in both horizontal and vertical orientations
Capacitor start and run
Single direction two speed selectable motor, thermal overload protected
Timer versions available, see ACM100T and ACM150T (RS 892-8713 and 892-8717 respectively)
Removable motor core assembly
Rotating motor chassis assembly
Terminal box with 20mm cable entry
Infinitely variable electronic fan speed controller (radio suppressed in accordance with BS 800) for direct use or via an external humidistat, thermostat, timer or sensor (not supplied) is available separately. See Stock Number 157-7056 for controller.
230 Vac mains powered
IP44 rated
Aesthetically pleasing with wipe-clean polymer casing

Supplied with

Horizontal/vertical mounting bracket

Specificaties
Kenmerk Waarde
Air Flow 256m³/h
Duct Diameter 100mm
Mounting In Line
Noise Level 23 dB(A) @ 3 m
Supply Voltage 220 → 240 V
Configuration Round
Special Features Aesthetically Case Style with Wipe Clean Polymer Casing, Removable Motor Core Assembly, Rotating Motor Chassis Assembly, Two Speed Selectable Motor
Series ACM
Static Pressure 150Pa
Maximum Current 100mA
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
240,57
(excl. BTW)
291,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 240,57
Related Products
ebm-papst DC sleeve bearing fans are an ideal ...
Description:
ebm-papst DC sleeve bearing fans are an ideal soultion to a wide range of applications, with fibreglass-reinforced plastic and completely integrated electronic commutation. Featuring electronic protection against reverse polarity, the ebm-papst DC fan only operates when the polarity is correct. ...
Centrifugal fan suitable for wall, ceiling or ducted ...
Description:
Centrifugal fan suitable for wall, ceiling or ducted applications. Stylish design blends in with modern decor. Surface or flush mountingIntergral back draught shutterLubricated for life motor with thermal cut outClip-off front coverTimer model allows the fan to run on; can ...
Powerflow models provide a compact yet versatile range ...
Description:
Powerflow models provide a compact yet versatile range designed with the installer in mind, combining the acoustic benefits of a tough plastic casing with the pressure characteristics of a centrifugal fan.Powerflow has 50-80mm long inlet and discharge spigots allowing easy ...
The Vent-Axia SDX Euroflow in-line centrifugal duct fans ...
Description:
The Vent-Axia SDX Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and external rotor motor to ensure a compact design, high performance and low sound levels.The in-line fan casing is constructed from pressed steel ...