Megger 1010-516 Current Clamp, For Use With MCC1010

  • RS-stocknr. 183-9465
  • Fabrikantnummer 1010-516
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions.

CAT IV 600 V current measurement to 1000 A AC
1 mA/1 A sensitivity with rated burden of 1 Ω
Large jaws for cables up to 52 mm
Overvoltage protection of the output terminals
Suitable for leakage currents

Specificaties
Kenmerk Waarde
Accessory Type Current Clamp
For Use With MCC1010
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
380,00
(excl. BTW)
459,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 380,00
Kalibratie-opties
Related Products
The Tektronix ’long nose’ style clamp-on probe uses ...
Description:
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
Superior measurement range from 100mA to 3000 Aac2000 ...
Description:
Superior measurement range from 100mA to 3000 Aac2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied)Low battery and range overload indicationRange selection by robust rotary switchHigh external field rejectionExcellent accuracy over full rangeSmall diameter (10mm) Rogowski ...
The Teledyne LeCroy 6m current probe is a ...
Description:
The Teledyne LeCroy 6m current probe is a state of the art device created for easy, highly accurate current measurements. The compact probes offer wide bandwidth with over-current protection and utilize a combination of Hall Effect and transformer technology that ...