Megger 1010-518 Current Clamp, For Use With MVC1010

  • RS-stocknr. 183-9467
  • Fabrikantnummer 1010-518
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions.

CAT IV 600 V current measurement to 1000 A AC
1 mA/1 A sensitivity with rated burden of 1 Ω
Large jaws for cables up to 52 mm
Overvoltage protection of the output terminals
Suitable for leakage currents

Specificaties
Kenmerk Waarde
Accessory Type Current Clamp
For Use With MVC1010
Calibrated UKAS
1 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
463,00
(excl. BTW)
560,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 463,00
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Description:
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.