Megger DET24C Earth & Ground Resistance Tester 1.5kΩ CAT IV 600 V

  • RS-stocknr. 910-6810
  • Fabrikantnummer 1007-331
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

DET24C Earth Test Clamp

DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability over products with interlocking teeth.

Other enhancements include a built-in filter function for electrically noisy environments, time and date stamped stored test results and ultra-long battery life. PowerDB Lite software comes as standard with the instrument.

Elliptical clamp shape improves access to earth cables and straps up to 50 mm
Low maintenance flat jaw interface
Measures ground resistance from 0.05 Ω to 1500 Ω
Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms
CAT IV 600 V safety rating
Backlit LCD display
Bluetooth® stored test results transfer to PC
Advanced memory functionality with download
Megger PowerDB/PowerDB Lite™ compatible
300% increase in battery life

Supplied with

Carry case, carry strap (wrist loop), user guide CD-ROM, calibration check accessory, powerDB Lite software & 4 x AA alkaline batteries

Megger Earth & Ground Resistance Tester

The Megger earth and ground resistance tester measure a 1.5kΩ absolute maximum resistance and having the CAT IV 600V safety category. This 4-pole earth tester is used to measure soil resistivity and resistance of earth rods and associated installations. It is supplied in a hard carry case together with auxiliary stakes and cables. An ICLAMP selective clamp is available separately and when used with the DET4TC allows the testing of an earth rod without the need to disconnect from the system. A VCLAMP is also available separately, which when used in conjunction with ICLAMP allows stakeless measurements to be made in situations where driving auxiliary stakes is not practical. It has a rechargeable battery-powered 4-terminal tester with selectable test frequencies, greater measurement sensitivity and attached rod technique and stakeless measurement capability.

Features and Benefits

• Large flash memory and can store up to 992 individual recordings

Applications

• Buildings, pylons and RF transmitter sites
• Lightening protection systems

Certifications

• EN 61010-2-032
• IEC 61557-13 Class 1
• IEC 61557-5

Specificaties
Kenmerk Waarde
Absolute Maximum Resistance Measurement 1.5kΩ
Best Accuracy 1.5 %
Display Type LCD
Safety Category CAT IV 600 V
Battery Life 24 h
Battery Type AA Alkaline
Power Source Battery, Mains
Dimensions 248 x 114 x 49mm
Weight 985g
Height 49mm
Includes CD-ROM, User Manual
Length 248mm
Maximum Operating Temperature +50°C
Measurement Type Frequency, Ground Resistance, RMS AC Current, RMS Ground Leakage Current
Width 114mm
Minimum Operating Temperature -20°C
Safety Category Level CAT IV, EN 61010-2-032
Safety Category Voltage 600V
Model Number p DET24C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.610,00
(excl. BTW)
1.948,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.610,00
Kalibratie-opties
Related Products
Kits for performing tests required by NF C ...
Description:
Kits for performing tests required by NF C 15-1001 DT-170 (differential controller)1 DT-300 (earth and continuity measuring device and extension cord)1 M-9955538 (diagnostic book 15-100)1 DT-500* (Insulation controller and connectors).
Tester for complete and rapid appraisal of earths.Multi-function ...
Description:
Tester for complete and rapid appraisal of earths.Multi-function measurement:Earth resistance, earth coupling, soil resistivity and continuity/resistance.Ergonomic:Rugged, watertight field enclosure with giant backlit LCD display.Direct access to measurements by selector switch.Battery can be recharged from mains ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
MIT480 mk2 Series insulation & continuity testers replace ...
Description:
MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range. Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. Insulation testing up to ...