SES Sterling Earth Clamp Tinned Bronze 8 → 28mm diameter, 2.5 → 6mm² Wire Range

  • RS-stocknr. 236-5264
  • Fabrikantnummer 06190007000
  • Fabrikant SES Sterling
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Earth Straps

Unique concept for maintaining earth continuity through its system of double clamping
Wide range of conductors per type of earth strap (2.5 - 6mm²)
Strap material: tinned bronze
Cap and screw material: electroalvanised steel

Earth Straps

Unique concept for maintaining earth continuity through its system of double clamping
Wide range of conductors per type of earth strap (2.5 - 6mm2)
Strap material: tinned bronze
Cap and screw material: electrogalvanised steel

Specificaties
Kenmerk Waarde
Material Tinned Bronze
Minimum Wire CSA 2.5mm²
Maximum Wire CSA 6mm²
Minimum Diameter 8mm
Maximum Diameter 28mm
Diameter Range 8 → 28mm
Wire CSA Range 2.5 → 6mm²
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
442 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 20
47,79
(excl. BTW)
57,83
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
€ 47,79
€ 2,39
15 - 49
€ 45,41
€ 2,27
50 +
€ 43,96
€ 2,198
*prijsindicatie
Related Products
M20 earth lead adaptor for earthing metal conduit. ...
Description:
M20 earth lead adaptor for earthing metal conduit. IP56-IP65 (dependant on product) rated against dust, water and impact up to 500gWide operating temperature range -5°C to + 40°C.
Stainless steel strapPhosphor bronze with a zinc plating ...
Description:
Stainless steel strapPhosphor bronze with a zinc plating main clamp bodyCSA 10mm²Resistant to corrosion due to damp or chemical laden atmospheresAn aluminium label embossed "safety electrical connection do not remove " is suppliedPipe diameter to 1 inches.
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...