TE Connectivity Standard Edge II Series, PCB Edge Connector, 17 Way, 2.54mm Pitch, 3A

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity Standard Edge II Card Edge Connectors

Standard Edge II 2.54 mm high current card edge connectors with a low profile industry standard package designed for high reliability and economy. These Standard Edge II card connectors are designed to connect a daughter card to a motherboard. The contacts of these edge card connectors have a bifurcated cantilever design and are made from selectively gold plated precision formed phosphor bronze for extra strength and electrical reliability. These Standard Edge II 2.54 mm card edge connectors feature intercontact keying slots located in the card slot into which a keying plug can be inserted. This feature ensures a proper orientation with the mating daughter card which must also be slotted to accept the keying plug. The keying plug is available separately (see stock number 718-8407). Connectors with part numbers 1489162-x, 5645169-x and 5645235-x have an arrangement of kinked solder legs for a secure retention to the PCB during soldering.

Features and Benefits

• Highly reliable and economical
• Industry standard package
• Low profile design
• Bifurcated gold plated phosphor bronze contacts for strength and high reliability
• Intercontact keying slots for accurate orientation of card
• Versions available with kinked solder legs for secure retention to PCB

Product Application Information

These Standard Edge II 2.54 mm Card Edge Connectors are suitable for use in DC to DC converters low wattage power supplies, industrial grade card extenders and general low-cost I/O applications that require durable/rugged card edge contacts

Edge Connectors - TE

Specificaties
Kenmerk Waarde
Body Orientation Straight
Number of Contacts 17
Pitch 2.54mm
Termination Method Solder
Contact Plating Gold over Nickel
Contact Material Phosphor Bronze
Current Rating 3A
Keying Way Yes
Housing Material Glass Fibre Reinforced PET
Series Standard Edge II
Width 9.35mm
Minimum Operating Temperature -55°C
Length 49.78mm
Maximum Operating Temperature +85°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 594)
1,588
(excl. BTW)
1,921
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
594 +
€ 1,588
€ 943,272
*prijsindicatie
Related Products
2.54mm Crimp Snap Crimp Leaf housings designed for ...
Description:
2.54mm Crimp Snap Crimp Leaf housings designed for high density wire-to-board applications. These 2.54mm Crimp Snap Crimp Leaf housings are made from black GF polyester and have mounting ears. For suitable contacts see stock number 720-0692 typically.
PCIe Guide Frame, x4, for PCIe Add-In Cards, ...
Description:
PCIe Guide Frame, x4, for PCIe Add-In Cards, 1° Cage Angle, With Blocking Key.
The AMP DUOPLUG IDC connector system based on ...
Description:
The AMP DUOPLUG IDC connector system based on the RAST 2.5 standard. These RAST 2.5 AMP DUOPLUG IDC connectors can be used as single piece edge connectors where they fit into existing RAST 2.5 PCB frames or as a 2 ...
.050 Series PCI and standard card edge connectors ...
Description:
.050 Series PCI and standard card edge connectors with a 1.27mm pitch and 64 bit Bus width. These .050 Series PCI and standard card edge connectors have 92 Dual position contacts with the following board retention features:Stock number 718-8340 is ...