Megger 1001-975 Electrical Installation Tester Lead, Accessory Type 10 A Fused Test Lead Set with Prod & Clip

  • RS-stocknr. 134-7976
  • Fabrikantnummer 1001-975
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: GB
Productomschrijving

Megger Fused Test Lead

The Megger three-wire fused tester lead has a current rating of 10A used with MFT1731 on-site electrical installation tester. This fused test lead set is an ideal replacement or spare set for the megger range of multi-function testers. This product is suitable to use with the Megger MFT1552, MFT1553, MFT1710, MFT1720 and MFT1730. If you are experiencing poor and inconsistent continuity readings then it is likely to be your existing test leads that are at fault and it is time to replace them. This test lead set is supplied with crocodile clips and large, removable prods with GS38 probe tips, standard 4mm plugs at the instrument end and built-in 600V 10A fast-breaking fuses.

Features and Benefits

3-wire lead test set is supplied with crocodile clips and large, removable prods Length of the wire for test lead is 1.2m

Certifications

CAT III 1kV CAT III 600V GS38 compliant

Specificaties
Kenmerk Waarde
Accessory Type 10 A Fused Test Lead Set with Prod & Clip
For Use With MFT1731 On-Site Electrical Installation Tester
31 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 101,40
90,00
(excl. BTW)
108,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 90,00
Related Products
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
IR windows allow safe and effective thermal imaging ...
Description:
IR windows allow safe and effective thermal imaging of fully energised electrical systems through closed panels and doors during routine electrical maintenance / inspection. Arc flash resistant to 50 kA (IEC62271-100 and IEC62271-200)Certified to IP65 (BSEN60529) when open or closedMoisture ...
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...
Support Accessories:. Multifunction installation testers to verify the ...
Description:
Support Accessories:. Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applicationsMeet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulationsLarge illuminated display with exceptionally wide viewing angleRugged: ...