Multi Contact 23.5140-33 Electrical Installation Tester Cap, Accessory Type Cap, For Use With SEB4, SLB4, XE-1R(R)

  • RS-stocknr. 226-3118
  • Fabrikantnummer 23.5140-33
  • Fabrikant Staubli
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Multi Contact Socket Safety Cap

The Multi Contact electrical installation tester safety cap is used to cover unused or unplugged panel-mounted sockets. It is made from low-density polyethylene.

Specificaties
Kenmerk Waarde
Accessory Type Cap
For Use With SEB4, SLB4, XE-1R(R)
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 10)
0,993
(excl. BTW)
1,202
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 0,993
€ 9,93
100 - 240
€ 0,944
€ 9,44
250 - 490
€ 0,906
€ 9,06
500 - 990
€ 0,871
€ 8,71
1000 +
€ 0,833
€ 8,33
*prijsindicatie
Related Products
IR windows allow safe and effective thermal imaging ...
Description:
IR windows allow safe and effective thermal imaging of fully energised electrical systems through closed panels and doors during routine electrical maintenance / inspection. Arc flash resistant to 50 kA (IEC62271-100 and IEC62271-200)Certified to IP65 (BSEN60529) when open or closedMoisture ...
3-phase current adapter for connecting test instruments to ...
Description:
3-phase current adapter for connecting test instruments to 5-pole CEE outlets. These adapters correspond to 5-pole CEE sockets with nominal current Phase sequence testing with signal lamps Testing for effectiveness of protective measures with five 4mm contact protected sockets.
The Multi Contact CAT II - SKS4-19L series ...
Description:
The Multi Contact CAT II - SKS4-19L series electrical installation tester connecting plugs are fully insulated 4mm safety connecting the bridge with 19mm plug spacing. They have a solid brass gold-plated connector body. The rated voltage and current for the ...
An in-line holder to connect individual components with ...
Description:
An in-line holder to connect individual components with 4mm safety test leads. Holder comprises 2x4mm safety plugs and 2x4mm safety sockets rated at 600V (CAT II)Component solder connections are provided within the screw-together adaptor casing Components clearly visible through transparent ...