RS PRO MT-6600 Electrical Tester

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RS PRO Multifunction Installation Tester

Introducing the RS PRO electrical tester, a high-performance tester ideal for use on motors, generators, cables, or switch-gear. This electrical tester has been designed to perform a full range of multifunctional tests including insulation resistance, earth resistance, loop impedance, voltage, RCD, PFG and PSC. It is designed with a software system that ensures the fixed wiring is safe and correctly installed and the safety of electrical installations in domestic, commercial and industrial applications.

This versatile device features a user-friendly interface with clear layout of navigational buttons and a large 3.5" TFT colour LCD display. It's fast sampling and dual display, clear symbols and exceptionally wide viewing angle allow you to read results clearly. Bluetooth connectivity allows you to store and transfer files to a computer or mobile device, offering excellent data storage options. The device features an IP rating IP67, offering high quality protection from dust ingress and water, ensuring the device is protected in a variety of environments. The device also comes with a durable carry case, providing excellent protection and storage.

Features and Benefits

• Multifunction tester
• Test a variety of installation parameters
• 3.5 in TFT colour LCD display with 320 x 240 pixels
• Fast high current loop test
• Variable RCD current mode for customized settings
• PASS/FAIL indication for RCD tests
• Select voltage measurement between L-N, L-PE and N-PE
• Support SD memory and USB and Bluetooth interface
• Internal Memory
• Safe Earth Volt Touchpad detects raised earth voltages greater than 50 V, indicating potential dangerous situations
• Slim probes designed with test button
• For easy, always reliable and accurate compensation of test leads and mains cords
• IP67 protection from dust ingress and water
• Durable carry case included

Application

Multifunction Electrical Testers are known as MFTs, a critical piece of equipment for testing electrical circuits. They offer a wide range of testing features such as resistance of insulation and earth, loop impedance, voltage and more.

They are typically used in applications such as:

• Commercial
• Domestic
• Installation
• Engineering
• Electrical

Is this calibrated?

We offer this model with the following calibration:

RS CAL - 1445350
UKAS CAL - 1445351

What is the IP rating?

The IP rating refers to the level of protection offered by the enclosure of the device. The first number relates to the level of protection from solids such as dust, whereas the second digit relates to liquid. The higher the IP rating, the higher the level of protection will be.

This device features an IP67 rating, offering protection from dust ingress and water.

Why choose RS PRO Electrical Testers

Our range of testers is designed to be safe, simple to use and hassle-free. Each of our testers is available calibrated and are the perfect solution for troubleshooting, commissioning, and preventative maintenance applications.

Contents

• Test leads
• Clips
• Crocodile clips
• High voltage test leads
• Power test leads
• International power adaptor
• Bluetooth/car adaptor
• USB cable
• Battery

Specificaties
Kenmerk Waarde
Loop Impedance Test Type Phase to Earth
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 1000V
Maximum Voltage Measurement 1000V
Earth Resistance Measurement Yes
Interface Type Bluetooth
Continuity Test Current 1mA
RCD Test Type General, Selective
Maximum Operating Temperature +45°C
Dimensions 242 x 105 x 145mm
Safety Category Level CAT III
Weight 1.6kg
Minimum Operating Temperature 0°C
Minimum Continuity Resistance
Width 105mm
Power Source Battery
Maximum Continuity Resistance 2000Ω
Display Type LCD
Length 242mm
Battery Type 1.2 V AA Rechargeable Ni-MH, 1.5 V AA Alkaline
IP Rating IP65
Safety Category Voltage 600V
Safety Category CAT III 600 V
Height 145mm
Model Number p MT-6600
33 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
513,50
(excl. BTW)
621,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 513,50
Kalibratie-opties
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 ...
Rugged, compact and lightweight, the C.A 6116N tester ...
Description:
Rugged, compact and lightweight, the C.A 6116N tester is specially designed for quick and effective familiarization. Its large backlit graphic colour LCD screen is particularly easy to read. A rotary switch on the instrument’s front panel gives direct access to ...
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, PRO-Schuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, Universal Carrying Pouch F2010 Z700G, Battery Pack Master Z502H and charger Z502R. Measurement of RLO, ZL-PE, ZL-N, RINS, RE, ΔU, phasesequence and voltageOFFSET Management RL-PE / RN-PE ...
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and chargerZ502R. Measurement of RLO, ...