Catu DT-155 Electrical Tester

  • RS-stocknr. 309-5758
  • Fabrikantnummer DT-155
  • Fabrikant Catu
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Catu Electrical installation tester

The Catu Electrical installation tester is used to combines all essential functions to control and visualize instantly the quality and conformity of 230 V electrical installations. This tester immediately indicates whether the earth conductor in each of your sockets is connected. This tester enables you to perform the presence of voltage at the terminals of a socket, integrity of the earth circuit, correct polarity the position of the phase and the neutral is indicated. It also uses to choose the correct operation of the ELCB system at the following sensitivities, 30 mA, 100 mA, 300 mA, 500 mA, 650 mA.

Features and Benefits

Fuse protection
Class I reinforcement insulation
Operating temperature is between -150C and 450C
Presence of voltage at the terminals of a socket
Possible detection of the signal with max network current of 80A

Certifications

CE certified
IEC 61010-1
IK03 rated
IP40 rated

Specificaties
Kenmerk Waarde
Maximum Voltage Measurement 230V
Earth Resistance Measurement Yes
Continuity Test Current 30 mA, 300 mA, 500 mA, 650 mA
Model Number p DT-155
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
215,00
(excl. BTW)
260,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 215,00
Related Products
Megger Duplex probe 1 connect handspike with sprung ...
Description:
Megger Duplex probe 1 connect handspike with sprung loaded tips fitted with a connector socket for easy connection to any connector test lead. Replaceable probe tips have hardened needle points, gold plated for excellent low-resistance contact. Tips are sprung to ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
Using FieldSense Technology the T6-1000 measures voltage up ...
Description:
Using FieldSense Technology the T6-1000 measures voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as ...
The Megger electrical tester is an MFT1800 series ...
Description:
The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with German mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing ...