Chauvin Arnoux DTR 8510 Ratiometer

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

DTR 8510 Digital Transformer Ratiometer

The DTR 8510 Dogital Transformer Ratiometer is fully automatic and uses the IEEE C57.12-90™-2006 test method. The DTR 8510 is a portable digital transformer ratiometer designed for on-site testing of power, potential and current transformers.When connected to a non-energized transformer, the DTR 8510 accurately measures the primary-to-secondary turns ratio, while simultaneouslydisplaying the polarity and excitation current.

Automatic calibration and balancing
No adjustments required
Low-voltage test
Measures power transformers, VT/PTs and current transformer turns ratios
Displays turns ratio, excitation current, winding polarity and % deviation from the nameplate values
Large dual display with adjustable contrast ensures clearer visibility in any lighting environment, day or night
Up to 10,000 tests can be stored
USB port to simplify instrument configuration and downloading of test results
NiMH battery life of up to 10 hours

Standards

EN 61010-1, 50V CAT IV, Pollution Degree 2

Supplied with

DataViewⓇ analysis software

Specificaties
Kenmerk Waarde
Test Type Wiring Polarity
Downloadable Data Yes
Interface Type USB
Test Standards EN 61010-I
Length 272mm
Dimensions 272 x 248 x 130mm
IP Rating IP40, IP53
Height 130mm
Model Number p DTR 8510
Weight 3.7kg
Safety Category Level CAT IV
Safety Category Voltage 50V
Width 248mm
Power Source Battery
Safety Category CAT IV 50 V
Battery Type NiMH
Display Type LCD
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4.320,00
(excl. BTW)
5.227,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4.320,00
Related Products
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
Introducing the RS PRO electrical tester, a high-performance ...
Description:
Introducing the RS PRO electrical tester, a high-performance tester ideal for use on motors, generators, cables, or switch-gear. This electrical tester has been designed to perform a full range of multifunctional tests including insulation resistance, earth resistance, loop impedance, voltage, ...
The Megger electrical tester is an MFT1800 series ...
Description:
The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with German mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing ...
The KT63 Multifunction Tester is the perfect 17th ...
Description:
The KT63 Multifunction Tester is the perfect 17th Edition tester for electricians wanting to test and certify electrical installations in both domestic and commercial properties. The KT63 Multifunction Tester offers a variety of tests including Continuity, Insulation, Auto RCD and ...