Gossen Metrawatt M503B Electrical Tester

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: SK
Productomschrijving

Master package PROFITEST INTRO M503B

Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and charger
Z502R.

PROFITEST INTRO M520T Tester, IEC 60364-6 / DIN VDE 0100-600

Measurement of RLO, ZL-PE, ZL-N, RINS, RE, ΔU, phase
sequence and voltage
OFFSET Management RL-PE / RN-PE / RL-N
Measuring functions can be selected directly via the rotary switch
Testing of RCD types A, AC, F, B, B+, EV, MI and G/R, as well as SRCDs and PRCDs
Display of approved fuse types for electrical systems
Phase sequence measurement (including highest line-to-line voltage)
Measuring of contact voltage by Finger contact
Connection of an RFID reader or a barcode scanner
Individual measured value memory and memory structure setup
Help functions with wiring diagrams
Bidirectional data exchange via USB, DDS-CAD and epINSTROM
Measuring category: CAT III 600 V / CAT IV 300 V
International prompting (12 languages)
ETC software (Electrical Testing Center) for, amongst other functions, creating tree structures and documentation per ZVEH

Note

Comprehensive operating instructions available on the Internet for download at www.gossenmetrawatt.com

Specificaties
Kenmerk Waarde
Loop Impedance Test Type Phase to Earth, Phase to Neutral
RCD Ramp Test Yes
Insulation Test Voltage 3700V
Maximum Voltage Measurement 600V
Test Type Wiring Polarity
Earth Resistance Measurement Yes
Continuity Test Current 15mA
RCD Test Type DC Selective
Remote Switch Mode Yes
Test Standards DIN VDE 0100-600, IEC 60364-6
IP Rating IP40, IP52
Safety Category CAT III 600 V, CAT IV 300 V
Battery Type AA
Safety Category Voltage 300 V, 600 V
Safety Category Level CAT III, CAT IV
Plug Type Type F - Schuko plug
Maximum Continuity Resistance 9.99kΩ
Weight 1.5kg
Model Number p M503B
Height 140mm
Minimum Operating Temperature 0°C
Length 130mm
Width 225mm
Power Source Battery, Mains
Minimum Continuity Resistance 300mΩ
Dimensions 130 x 225 x 140mm
Maximum Operating Temperature +40°C
Display Type LCD
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
1.625,00
(excl. BTW)
1.966,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.625,00
Related Products
Megger Duplex probe 1 connect handspike with sprung ...
Description:
Megger Duplex probe 1 connect handspike with sprung loaded tips fitted with a connector socket for easy connection to any connector test lead. Replaceable probe tips have hardened needle points, gold plated for excellent low-resistance contact. Tips are sprung to ...
Support Accessories:. Multifunction installation testers to verify the ...
Description:
Support Accessories:. Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applicationsMeet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulationsLarge illuminated display with exceptionally wide viewing angleRugged: ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
The HAL 101 offers simple straightforward operation in ...
Description:
The HAL 101 offers simple straightforward operation in a factory test or lab/compliance environment. Providing simple manual testing or complete automated operation, equipment can be tested quickly and safely. Fast automatic production testing using sequence capabilityPerforms a.c./d.c. Flash and d.c. ...