Fluke 1653 Electrical Tester RS Calibration

  • RS-stocknr. 911-9784
  • Fabrikantnummer FLUKE 1653B-01
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Fluke 1650 Series Multifunction Installation Testers

Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.
They allow electrical wiring to be certified to the new standard NF C 1500.
These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new era in the electrical testing domain.
Measures voltage, frequency, insulation resistance, continuity, earth loop resistance, tripping time test.
The 1652 model also features trip current measurement (ramp) as well as DC current detection.
The 1653 model also measures earth resistance and features phase sequence indication (ES165X earth stake kit available separately).
Supplied with a carry case, mains test lead, test button probe (TP165X), manual, batteries and neck strap.
Full technical specifications and documentation available at our website.

Note

RS 669-9350 is the French version of the Tester and is fitted with a Type F shucko plug.

Specificaties
Kenmerk Waarde
Calibrated RSCAL
Loop Impedance Test Type 3 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 50 V, 100 V, 250 V, 500 V, 1000 V
Maximum Voltage Measurement 500V ac
Test Type Continuity, Wiring Polarity
Earth Resistance Measurement Yes
Downloadable Data Yes
Continuity Test Current 200mA
RCD Test Type AC Type
Test Standards EN 61010-I, HD 384, IEC 60364
Plug Type Type F - Schuko plug
Height 125mm
Model Number p 1653
Battery Type AA
IP Rating IP40
Minimum Continuity Resistance 20Ω
Weight 1.3kg
Safety Category CAT III 500 V, CAT IV 300 V
Minimum Operating Temperature -10°C
Safety Category Level CAT III, CAT IV
Dimensions 100 x 250 x 125mm
Maximum Operating Temperature +40°C
Display Type LCD
Length 100mm
Safety Category Voltage 300 V, 500 V
Width 250mm
Power Source Battery, Mains
Maximum Continuity Resistance 2000Ω
43 op voorraad - levertijd is 2 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
1.426,00
(excl. BTW)
1.725,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.426,00
Related Products
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and chargerZ502R. Measurement of RLO, ...
A portable digital flash tester incorporating an electronically ...
Description:
A portable digital flash tester incorporating an electronically controlled variable test voltage and safety flash probe, suitable for testing to 17th Edition Regulations (BS7671). Selectable 120/240V, 50/60Hz operationIncorporates a solid state regulator to give stepless voltage adjustment, with safety zero ...
The DT-500 checks insulation resistance for systems or ...
Description:
The DT-500 checks insulation resistance for systems or devices.A 500 V measuring voltage delivered by the device is used to perform this check (in compliance with NF C15-100).Phase / neutral shunt function.Battery-saving function.Live voltage indicator and battery status indicator.Belt clip ...