Mitutoyo 571-212-10 Depth Micrometer, 200mm

  • RS-stocknr. 734-157
  • Fabrikantnummer 571-212-20
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

Digital

These three digital depth gauges give measurements in imperial or metric with resolution to 0.0005in. or 0.01mm. It has functions for ± deviation from nominal, instant metric/imperial conversions and an output port for transmission to Mitutoyo SPC data processors. The non-contact linear measuring system is unaffected by electrical interference or magnetism and will compensate for mechanical wear. All gauges are supplied fitted with an SR44 battery (stock no. 593-423).

Specificaties
Kenmerk Waarde
Maximum Measurement 200mm
Accuracy ±0.001 in
Resolution 0.01 mm
Imperial or Metric Both
Metric-Imperial Conversion Yes
Finish Micro Lapped
Battery Type LR44
Power Source Battery
Model Number p 571-212-10
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
537,38
(excl. BTW)
650,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 537,38
Related Products
A depth micrometer with interchangeable depth rods supplied ...
Description:
A depth micrometer with interchangeable depth rods supplied in a polypropylene case. Base 100mm long x 16mm wide4.5mm diameter depth rods0 to150mm / 0 to 6in. rangeFriction thimble.
Depth gauge micrometers manufactured to the tolerances required ...
Description:
Depth gauge micrometers manufactured to the tolerances required by BS6468Constant force ratchet-stop and positive locking clampAdjustable to compensate for wearSets include six 3.15mm diameter measuring rods and adjustment spanner.
Heads are manufactured from fully hardened steelBase and ...
Description:
Heads are manufactured from fully hardened steelBase and Top surface are ground for use as a datum faceBase Datum Face: 2 1/2in x 1/8in Top Datum Face: 1in x 1/8inBevelled surface of datum face allows easy reading of ruleRule clamped ...
Precision manufactured to BS959Accuracies of 0.01mm/0.0004in.ranges of 50 ...
Description:
Precision manufactured to BS959Accuracies of 0.01mm/0.0004in.ranges of 50 to 300mm/2 to 12in.Each set consists of a micrometer head with locking screw, 10 range identified measuring rods, 12mm/ 1/2in. lapped collar and 2 adjustment spannersThe micrometer has 13mm/ 1/2in. movement graduated ...