Keysight Technologies Electronic Load N3000A N3306A 0 120 A 0 60 V 0 600 W, 0.017 1

Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: MY
Productomschrijving

N3300A Series Electronic Loads

This series of DC electronic loads provides fast operation and accurate programming & readback for high-volume DC power supply test systems. The N3300A full-rack width mainframe (3.2kg) accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. It holds user-determined permutations of the N3302A (150W), N3303A & N3307A (250W) and N3304A (300W) modules (one slot each) and N3305A (500W) and N3306A (600W) modules (two slots each). This gives up to 1800W of power, with one GPIB address providing complete control and readback of all the load modules within a single mainframe. The half-rack width N3301A mainframe has two slots.

GPIB and RS-232 control of current, voltage and resistance
GPIB and RS-232 readback of current, voltage and power
Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate
Full protection from over-current, over-voltage, over-power, over-temperature and reverse polarity
Electronic calibration
Trigger for external synchronization
Parallel units in constant current mode for higher power
VXI plug&play drivers

Note

For mounting the N3300A two off Rack Mount Kits 713-4270 will be required.

Note

Comes with with manually tightened connectors

Keysight Power Supplies

Specificaties
Kenmerk Waarde
Series N3000A
Constant Wattage Mode Range 0 600 W
Constant Voltage Mode Range 0 60 V
Constant Current Mode Range 0 120 A
Constant Resistance Mode Range 0.017 1 Ω
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
2.998,00
(excl. BTW)
3.627,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.998,00
Related Products
The new EA-EL 9000 T series of compact ...
Description:
The new EA-EL 9000 T series of compact electronic DC loads offers three tower models for the daily application in research laboratories and even schools. Lower power ratings allow for a multitude of test applications while being cost effective and ...
Introducing the RS-KEL103 single channel electronic load from ...
Description:
Introducing the RS-KEL103 single channel electronic load from RS PRO, a highly reliable device ideal for testing a range of power supplies, ensuring they meet standard safety and compliance standards. This durable electronic load from RS PRO features 4 working ...
Maximum input power up to 600 WCC/CV/CR/CW operating ...
Description:
Maximum input power up to 600 WCC/CV/CR/CW operating modesTransient mode up to 10 kHz in CC mode16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolutionList mode and adjustable slew rate in CC modeShort circuit ...
The BK8540 DC electronic load is a compact, ...
Description:
The BK8540 DC electronic load is a compact, economically priced instrument equally well-suited for use on bench and production floor. Although it comes in a small package, the BK8540 can reliably test a 5 volt power supply to 30 amps ...