Keithley Electronic DC Load 2380 2380-120-60 0 → 60 A 0 → 120 V Maximum of 250 W, 10 Ω → 7.5

  • RS-stocknr. 917-6566
  • Fabrikantnummer 2380-120-60
  • Fabrikant Keithley
Wetgeving en compliance
Land van herkomst: CN

Keithley 2380 Series Programmable DC Electronic Loads

Keithley Series 2380 programmable DC electronic loads can sink a wide range of voltages and currents. The 200 W model 2380-500-15 ( 917-6569 ) can accept up to 500 V or 15 A. The 250 W model 2380-120-60 ( 917-6566 ) can accept up to 120 V or 60 A. The 750 W model 2380-500-30 ( 917-6563 ) can accept up to 500 V or 30 A. These single-output, stand-alone DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR) or constant power (CP) mode. They can be configured to provide a dynamically changing load to the DC source with up to 25 kHz of dynamic cycling, superior voltage/current resolution and readback accuracy, and multiple interface choices.

Features and Benefits

Constant current (CC),constant voltage (CV), constant resistance (CR), and constant power (CP) operating modes
LED simulated load test mode
Readback voltage and current resolution down to 0.1mV/0.01mA
Dynamic mode with cycle rate up to 25kHz
Voltage rise and fall time measurement
Current monitor function
List mode
Battery test mode
Built-in GPIB,USB and RS-232 interfaces
Dimensions 214.81 x 104.24 x 397.03 mm (200/250 W models), 482 x 131.4 x 580 mm (750 W model)
Weight 4.65 kg (200/250 W models), 24.95 kg (750 W model)

Areas of Application

Environmental test, stress test and accelerated life testing for AC/DC power sources and DC/DC modules
LED lighting drivers and high power component testing
Automotive electronics testing
Battery research and discharge testing
Production test

Supplied with

Quick start guide, documentation CD, power cord

Kenmerk Waarde
Series 2380
Constant Wattage Mode Range Maximum of 250 W
Constant Voltage Mode Range 0 → 120 V
Constant Current Mode Range 0 → 60 A
Constant Resistance Mode Range 10 Ω → 7.5 kΩ
Rack Units 1 U
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.950,00
Related Products
This series of DC electronic loads provides fast ...
This series of DC electronic loads provides fast operation and accurate programming & readback for high-volume DC power supply test systems. The N3300A full-rack width mainframe (3.2kg) accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. It ...
One, two or three channels – R&S®HMC804x power ...
One, two or three channels – R&S®HMC804x power supplies with their specifications and wide range of functions are ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the linear power supplies remain cool and ...
The Keysight U8000 Series offers 90W ( 667-2581 ...
The Keysight U8000 Series offers 90W ( 667-2581 ) or 150W ( 667-2585 ) single output, non-programmable DC power supplies which include features normally found only in costly programmable supplies. The U8000 Series provides reliable DC power, efficient setup capabilities ...
The electronic DC loads series EA-EL 9000 B ...
The electronic DC loads series EA-EL 9000 B HP replace the current EA-EL 9000 HP series. They reduce the required unit height from 3U to 2U. Meaning, the steady power of 7200 W of a former EA-EL 9000 HP device ...