70 W Emergency Light Conversion Kit, 150 x 44 x 35 mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Emergency Lighting Kits

Ideal for integrating into existing control gear. Supplied with a fused terminal block and pre-cut connection wires.,The modules can be tuned specifically to the lamp, giving better performance for the cell capacity.

Note

Nominal tube diameter - T5=16mm, T8=26mm, T12=38mm

Conversion Kits

Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.

Specificaties
Kenmerk Waarde
Wattage 70 W
Fixing Centres 140mm
Length 150 mm
Height 35mm
Width 44 mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 133,92
106,87
(excl. BTW)
129,31
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 106,87
Related Products
Emergi-Lite emergency conversion kits are available for 4-pin ...
Description:
Emergi-Lite emergency conversion kits are available for 4-pin fluorescent lamps operating with switch start or high frequency control gear.These conversion kits comprise a set of inverter/charger module, charge monitor LED, specialist battery and end caps. Remote kits comprise the parts ...
The LifeGuard cordless LED multi-functional emergency kit from ...
Description:
The LifeGuard cordless LED multi-functional emergency kit from Nightsearcher, offers several functionalities within one unit. So it can be a floodlight, torch, belt cutter and window breaker, making it a perfect addition for your car. The LifeGuard’s capable of 200 ...
Analog input kit designed for use with Schneider ...
Description:
Analog input kit designed for use with Schneider Electric Modicon series. LED status indication for quick referenceSupports 4x analog inputs and supports both 4-20mA & 0-20mA Kit Contains:STBACI0320 module STBXBA2000 base STBXTS1100, 6-terminal screw type connector STBXTS2100, 6-terminal spring clamp ...
The PowerLED lineo, 5m LED kit is a ...
Description:
The PowerLED lineo, 5m LED kit is a 24VDC, 2700K colour temperature. It is specifically designed to illuminate architectural areas with a cool white ambience, offering a 320lm (lumen output) performance. This 5W per meter commercial LED is manufactured a ...